I recently tried installing AMD StoreMI on my Windows 2022 server. Big mistake — it immediately failed to boot with a BSOD. And this was just after installing — I hadn’t even run the program. So the first lesson is not to trust AMD’s software — absolutely shocking!
… Leer artículo completo
Entradas etiquetadas: amd
3
Comparación del rendimiento de la GPU madvr
My current HTPC has an nVidia GeForce GTX 1050Ti 4Gb with which I am able to upscale all content to 1080p with fairly high quality settings, y yo también (sólo) able to playback 8k 60fps content downscaled to 1080p. However, I have long wondered what the benefits of a more powerful card might be on the ability to use higher settings. Tristemente, no-one seems to provide any benchmarks for madvr, Entonces, ¿cómo se pueden comparar las tarjetas?
… Leer artículo completo
0
Fixing stability issues with Asus E35M1‑M Pro
La base de mi principal HTPC is an AMD E350 Brazos in the form of an Asus E35M1‑M Pro. I had quite a lot of problems with the system when I first built it, which were caused by issues with the Seagate Momentus XT storage drive I used. These were fixed a good while ago via firmware update from Seagate, and since then the system has largely worked without any issue.… Leer artículo completo
0
Fijo: Accidentes E350 AMD & error no válido del dispositivo de arranque
I’ve had an AMD E350 system for over a year, que utilizo como mi primaria HTPC. However, in that time I’ve always had ocasional Stability issues where the system would lock up, reiniciar, y no encontrar la primaria HDD. Al principio yo achaco a que el HDD — a Seagate Momentus XT, which was known to be unreliable when it was first released. Since Seagate released update firmware however the drive has seemed to operate fine, although I couldn’t rule it out. También actualicé el BIOS of my Asus E35M1‑M Pro and updated all the drivers I could find, without fully resolving the issue.
0
BrazosTweaker: AMD Brazos E350 tweaker
As regular readers will know, mi principal HTPC is currently based on an AMD Brazos E350. I’d like to say a quick thanks to SemiAccurate for their recent article highlighting the excellent BrazosTweaker by Sven Wittek. This tool (and its sibling FusionTweaker) enable the tweaking of P‑States (la tensión en modo de bajo consumo) de Brazos y Llano fichas, al igual que K10Stat, PhenomMsrTweaker, RMClock, CrystalCPUID and others have done in the past. To quote SemiAccurate, “the main purpose of both these tools is to modify the voltages and clock dividers of the built-in P‑States on these chips.”
The FusionTweaker utility is still somewhat buggy by all reports, but BrazosTweaker seems reliable to me. I highly recommend reading theSemiAccurate article and then grabbing the tool if you have a Brazos HTPC, o portátil.
2
Problems with Catalyst Mobility — Fixed
I own a Dell Studio 1557 ordenador portátil con un procesador AMD (antiguamente ATI) Mobility Radeon 4570. Whilst Dell provide a driver, they don’t keep up-to-date with AMD’s monthly release cycle so in the past I have installed newer versions from AMD directly.
… Leer artículo completo
0
Instalación de los controladores Mobility Radeon de ATI
Actualizar: Catalyst Mobility drivers are now available for many cards from ATi. (as of Catalyst version 10.3)
It seems to be very difficult to obtain reasonably up-to-date drivers for the ATi graphics chips in many laptops. Esto es debido a que el OEMs have asked ATi not to provide generic drivers direct to the end user, ostensibly to reduce support requests from users with drivers not tested by the OEM’s. This seems perfectly reasonable, pero la triste realidad es que la mayor parte OEM’s only update the drivers for a new laptop model a few times and soon abandon it as they concentrate on the next generation release. For those people trying to update their drivers to address a problem or to gain access to new features there are no clear options. Fortunately there are ways around this problem.
… Leer artículo completo
0
Antiguo K7S6A motherboard Mod
Bueno, so this tip wont prove useful to many people, but as the original site seems to have disappeared I’m posting it to keep it alive.
If you have an Élite Group (ECS) K7S6A motherboard for AMD Socket A and you want to upgrade to a “Thoroughbred” Athlon XP Processor it is possible by removing a single small component from the motherboard.
… Leer artículo completo
“Hi James I realise it has been a long while, but I just checked this on windows 11 (build 23H2)…”