I have been looking to design a new home theatre room, and researching this topic has led me to a few preliminary conclusions. First of all, there are lots of different ideas out there about home cinema room shapes!
My home theatre room needs to also function as a lounge, so a standard rectangular shape is likely. As the ceiling is a fixed height of 8’ (2.44m) I will be basing the other dimensions around this. Ideally I’d like a good size to also accommodate all the usual furniture found in a lounge. This means a room of approx 20 sq m floor area, which with a height of just over 2 metres means a room volume in the region of 50 m³.
I will be using a HD projector with a large screen size, around 70–80″ (2m), and sitting at a distance of about 3.5m (11.5′). This is well into the zone where 1080p becomes advantageous as illustrated by the graph.
Room Ratios, Standing Waves & Room Modes
As AxiomAudio explains, the most basic advice is to avoid home theatre rooms with dimensions with common denominators – otherwise you suffer from standing waves at certain frequencies.
Another commonly recommended ratio is the Sepmeyer Room C, which has a ratio of 1 : 1.6 : 2.33. The Sepmeyer room ratios are commonly used for Hi-Fi & Audiophile listening rooms. They are recommended by PCper and CinemaSource
VIPCinemas, based on simulations carried out by Salford University, offers several ratios, including 1 : 2.3 : 3 and 1 : 1.6 : 1.8
Further research seems to indicate that no set of ratios is perfect, especially in small home sized rooms, which aren’t big enough to avoid room modes regardless of ratio. Any of the above ratios should offer a reasonable solution. I plan to use the Sepmeyer Room C as it is well tried and tested, and I suspect a lot of Hi-Fi equipment is designed with listening rooms in mind. It is also handy if I go to listening rooms to listen to potential new equipment, as I will be listening in a room with the same ratios as mine. Finally, it works well because a room 2.4m high will be approximately 4m wide and 5.5m long which is also a good size for a lounge.
Most recommendations are for the display to be on the shorter side on the room, however, for the room to function as a lounge as well, I plan to lay it out with the screen on the long side, so there is room for a very large display and for the speakers to be well spaced, as in the image.
Regardless of room dimensions, to get the best sound will also need a room that isn’t just a concrete box. Complex room shapes, like sloping ceilings can help. Soft furnishings, thick carpets and curtains can also help reduce standing waves and over the top reflections. The key is in the right balance – too much damping can lead to a dead sounding room. There are thousands of firms out there offering many room treatments. Some are genuinely useful, some are a substantial rip off and others are utter snake oil. At least initially I plan to get a nice carpet and curtains fitted, and those, combined with some standard room furniture (mainly sofas) will hopefully do the trick.
The placement of speakers is a much more widely agreed standard – as detailed in the image. The height of the fronts should ideally be ear height, and the rears should be 2′ above ear height – which is approximately ear height when standing
This article is a work in progress. We will continue to update it as we find out more information and try more experiments.
Think we've missed something? Let us know by commenting below. If you would like to subscribe please use the subscribe link on the menu at the top right. You can also share this with your friends by using the social links below. Cheers.