部分 1: 入门

1.1 入门

非常基础

1.1.1 购买托管

Whilst you can get a free Word­Press site from wordpress.com, you lose some con­trol and you have to serve their ads. I per­son­ally advise obtain­ing your own host­ing. 有很多的主机在那里, and which is most suit­able will depends on your require­ments and pref­er­ences. In the past I have hos­ted my own sites (e.g. jonscaife.com), I’ve used NearlyFreeSpeech.net for some sites (e.g. 英超 - Predictors.co.uk), and for this site I’m cur­rently using TSO­Host. You should find a pack­age that suits you. If you’re a begin­ner, I recom­mend find­ing a host which offers a con­trol pan­el that includes auto­mated install­a­tion of word­press (e.g. via softacu­lous) as TSO­Host does.

1.1.2 买域名

I strongly recom­mend hav­ing a domain name for your site. An appro­pri­ate domain is cheap, looks more pro­fes­sion­al and helps 本. The easi­est meth­od is to buy this at the same time as your host­ing. I’ve used low-cost-names in the past, but recently I’ve bought most of mine from 123-reg. This should be a straight-for­ward pro­cess. If you choose a domain that does­n’t end in .com then con­sider buy­ing the .com as well (see sec­tion 1.4.13). Also think care­fully about how long you buy the domain for — longer is bet­ter (see sec­tion 2.1.13)

1.1.3 指向您的域名到您的主机

一旦你有一个域名, you need to point it to your host­ing. If you’ve bought your host­ing and domain with the same pro­vider this has prob­ably already been done for you. 如果没有，您将需要编辑的 DNS entry for your domain name and point it to the Name Serv­ers of your host­ing pro­vider. You host­ing pro­vider will tell you what these are. You will usu­ally want to change the nameserv­ers — for example — as my host­ing is with TSO­Host I have my name serv­ers set to ns2.tsohost.co.uk and ns1.tsohost.co.uk
[google_adsense]

1.1.4 设置WordPress的

Once you have both host­ing and a domain name you need to set up word­press on your host­ing. Ideally this will be done via a con­trol pan­el man­ager like softacu­lous or fant­ast­ico and should take just a few clicks. If you don’t have that option you need to do a manu­al install­a­tion. There is an excel­lent guide to manu­al installs on liquid­web. Once you’ve got word­press installed, log in to your word­press dash­board via the fol­low­ing web address: HTTPS://<your.domain>/可湿性粉剂管理员/

1.1.5 理想情况下，这将通过softaculous或fantasyo等控制面板管理器完成，只需点击几下

You don’t want your site to look like a mil­lion and 1 oth­er word­press sites, so you will want an altern­at­ive theme. 有很多 免费主题 avail­able — for example, when this art­icle was ori­gin­ally pub­lished we were using the mys­tique theme.  Since that time we’ve moved to a cus­tom theme inspired by mys­tique and built on the respons­ive ver­sion of the 骨头起动主题. Ideally you will want to con­sider a cus­tom theme, 但对于这一点，你要么需要支付, or invest con­sid­er­able time devel­op­ing your own. Once your site is up and run­ning you can invest­ig­ate cus­tom themes. Word­Press has a very help­ful guide to devel­op­ing themes, but I recom­mend using some of the free “blank”, “bare-bones”, “naked”, “frame­work”, or “tem­plate” themes avail­able. These can get you star­ted on a cus­tom theme much faster, and many offer an excel­lent level of com­pat­ib­il­ity and fea­tures built-in. I recom­mend look­ing for (or cre­at­ing) 基于主题 HTML5 和 CSS3, and with sup­port for microformats/microdata/rich snip­pets included. It is also worth hav­ing a theme which is “respons­ive” — i.e. it can adapt to lots of res­ol­u­tions effect­ively — so it will dis­play on mobile devices cor­rectly. There is extens­ive cov­er­age of such themes else­where which I won’t duplic­ate here, for more inform­a­tion start by look­ing at WP May­or, 设计的小屋, Specky­Boy, Smash­ing Magas­ine 或者 Specky­Boy (再次).

If you decide to cus­tom­ise or devel­op a theme then I strongly recom­mend using HTML5.   This is a much more semant­ic lan­guage than pre­vi­ous ver­sions and intro­duces new tags which have much more sens­ible names than all the “div” tags that design­ers used to use.  Find out about tags like <sec­tion>, <art­icle>, <head­er>, <foot­er>, <不>, <sec­tion>, 和 <sum­mary on W3Schools的

1.1.6 测试 & 如果您决定自定义或开发主题，那么我强烈建议您使用 HTML5

一旦您的网站是准备去, 使用 W3C val­id­at­ors 为 HTML, CSS, 原子/ RSS 和 mobile friend­li­ness, 使用谷歌 rich snip­pets test­ing tool 测试你的微数据, and con­sider check­ing the access­ib­il­ity of your site. 有 many ser­vices out there that will run mul­tiple browser tests and send you back images to veri­fy that your page will render cor­rectly in the huge range of web browsers out there. Use the power­ful fire­bug browser plu­gin to debug any issues you find.

You can sub­scribe to DIY­Medi­aHome in many ways.  Most are dir­ectly linked from the menu at the top right and include an RSS 喂养, 页面 Face­book 和 Google+的 和 twit­ter feed.  You can also sub­scribe to any com­ment threads you reply to by tick­ing the option when writ­ing the reply.  If you would like to sub­scribe by e‑mail you can use the form below.  Finally — if you use a dif­fer­ent plat­form or site that you think we should be on then [int­link id=“2980” type=“page”]请您联系我们[/intlink] and we’ll see what we can do.  Thanks.

您可以通过多种方式订阅 DIYMediaHome

欢迎到蓝牙指南

This guide has blos­somed from a simple begin­ning to become the ‘net’s most extens­ive resource for Bluetooth help & inform­a­tion. 以上 100 dif­fer­ent USB 加密狗, PC Cards and laptop mod­els have now been suc­cess­fully setup with this guide. After fol­low­ing this guide you should be able to estab­lish com­mu­nic­a­tion between your PC and any Bluetooth 1.1 com­pli­ant device. 以上 50 devices have already been suc­cess­fully tested.

注: 本指南最后更新中 2005! Links to the patch­er util­ity have been removed due to the threat of leg­al action by Broad­com Corp. The patch­er was ori­gin­ally released on GSM-For­um and I believe cop­ies of it may still be found there. To the best of my know­ledge the patch­er has­n’t been updated in a long time. This guide was writ­ten for a ver­sion of the Bluetooth drivers which are now very old. It was also writ­ten with Win­dows XP in mind and may not work with Win­dows Vista or Win­dows 7.

谁该指南是为

The pur­pose of this guide is to take you through a step by step pro­cess, at the end of which you should be able to estab­lish com­mu­nic­a­tion between your PC and any Bluetooth enabled device. This guide is based on the Wid­comm Bluetooth suite which only runs on Microsoft Win­dows. If you use a dif­fer­ent sys­tem, 例如MacOS的或者Linux / Unix的, this guide will not be able to provide you with a com­plete solu­tion but much of the inform­a­tion should be use­ful to you. I do not provide any kind of guar­an­tee that this will work for every single case, it is a free resource of inform­a­tion, 而只存在试图帮助人们.

最近更新

• 恢复到盛开的 DIY 媒体主页

[google_adsense]

积分

This guide would­n’t be what it is without the many con­tri­bu­tions I have received. Please help us to improve the guide still fur­ther! If you find any inac­curacies, 高保真和家庭娱乐技术 [int­link id=“1326” type=“page”]请您联系我们[/intlink]. If you have a device that isn’t lis­ted on the tested devices list please [int­link id=“1326” type=“page”]send an e‑mail[/intlink] 因此它可以被添加. If you have any sug­ges­tions, inform­a­tion, or new ideas that might help oth­ers please [int­link id=“1326” type=“page”]给他们[/intlink]. 谢谢.

I would like to thank the fol­low­ing people for their extens­ive con­tri­bu­tions: Phantasm4489, Bluetooth­Mas­ter, Lion_III, 德里克·巴顿, Chris Walk­er, 安德鲁主, Mark Aller­ton, Ray Hilton and all the con­trib­ut­ors to GSM-For­um.

What you can do if this guide doesn’t work

Don’t give up! There are often some dif­fi­culties get­ting everything to work cor­rectly, but with a little patience and care you’ll get it fixed. I have added a Fre­quently Asked Ques­tions sec­tion to the guide which can answer many ques­tions. If you’re still strug­gling try some of the fol­low­ing links before [int­link id=“1326” type=“page”]我发送电子邮件[/intlink]:
该F.A.Q. | Whizoo.com | PC-Counselor.com | Geekzone.co.nz | GSM-For­um | Howard For­ums | The Expansys For­um | Sock­et Forum

I’m lost already, 我从哪里开始?

Due to the sheer quant­ity of inform­a­tion con­tained, this guide is arranged across mul­tiple pages. There is a link at the bot­tom of each page to the next page of the guide. Before start­ing the main pro­ced­ure there are sev­er­al oth­er pages that every­one should read. Once you have read through this intro­duc­tion you should go to the next page…
[nex­t­page title=“Tested Devices”]

测试设备

If your devices are included in the alpha­bet­ic­al list below they have already been tested with the guide. If you have a device that is not included in the list you should attempt the install­a­tion pro­ced­ure anyway.
[google_adsense]

[nex­t­page title=“Preparations”]

准备工作

Initial preparation

• Make sure you are logged onto Win­dows with a user account that has Admin­is­trat­ive rights.
• Dis­able anti-vir­us software.
• If you have a fire­wall run­ning on your PC, dis­able it.

Disconnect your device

如果你有 USB or a PCMCIA / PC Card Bluetooth device, please dis­con­nect it.
If you have a laptop / note­book or oth­er device with Intern­al Bluetooth that can be “turned off” please turn it off.

Download and extract the files

Down­load the IBM Integ­rated Bluetooth II Soft­ware (Wid­comm build 1.4.3.4) 从:
[ IBM FTP 现场 ] 或者 [ IBM HTTP Mir­ror ] 20.34 MB

Run the down­loaded file from IBM (called bthwxp1o.exe)

点击下一步, accept the license agree­ment, click next twice more and finally click finish.

The driver files have now been extrac­ted to C:\DRIVERS WIN BDCACT

Down­load the latest device recog­ni­tion file from [ [int­link id=“741” type=“page”]下载[/intlink] ] 16 Kb

Save the file to the IBM drivers loc­a­tion (C:\DRIVERS WIN BDCACT ) and over­write the exist­ing file.

Down­load the patch­er from [ Jons Guides ] 或者 [ Mir­ror 1 ] 或者 [ Mir­ror 2 ] 221 Kb (patch­er removed, 看[int­link id=“910” type=“page”]页面 1[/intlink] for reas­ons and pos­sible altern­at­ive locations)

Save the patch­er some­where easy to access (例如, on the desktop).

Run the Patch­er (patch_v4.exe) to extract the files.
[google_adsense]

Uninstall previous Bluetooth software

If you have pre­vi­ously installed any Bluetooth soft­ware you should unin­stall it before proceeding.

The fol­low­ing list is of soft­ware that should be unin­stalled, but it is not necesar­ily a com­plete list!

• Any pre­vi­ous Wid­comm software
• Any pre­vi­ous Soleil software
• Sony Bluespace software
• XTND­Con­nect Blue Man­ager software
• Microsoft Patch Q323183
• Any drivers that were sup­plied with your Bluetooth device
• Microsoft Intel­li­Type and Intel­li­Point soft­ware for Bluetooth mice & 键盘.

[nex­t­page title=“Driver Installation”]

驱动程序安装

重要信息. 请仔细阅读本，然后再开始!

If you were dir­ec­ted here from anoth­er site please start at the begin­ning of the guide by read­ing the Intro­duc­tion. Also please let me know what site dir­ec­ted you to this page so I can ask them to update their links. If you haven’t read the pre­par­a­tion instruc­tions then please do that before start­ing the driver install­a­tion pro­ced­ure. If you don’t fol­low the pre­par­a­tion instruc­tions this pro­ced­ure will prob­ably fail! I can­’t guar­an­tee that this guide will work for you. If you are using a mis­sion crit­ic­al sys­tem I do not recom­mend pro­ceed­ing. I don’t recom­mend using Bluetooth with net­work serv­ers anyway!
[google_adsense]

驱动安装过程

1. 运行C:\DRIVERS WIN 补丁 BTRegFix.reg
2. If you use a non-Eng­lish sys­tem:复制从C文件的setup.ini:\DRIVERS WIN 补丁到C:\Drivers\Win\BDCACT\ and over-write the exist­ing file.
3. 运行C:\DRIVERS WIN Bdcact Setup.exe开始安装驱动程序
4. 点击下一步, 接受许可条款, 下一个, 下一个, install
5. If you are using Win­dows ME, XP或 2003 you will prob­ably be promp­ted with a “Driver Sig­na­ture Notice”. If you are promp­ted, 单击OK.
6. Click Fin­ish to com­plete setup.
7. If you are promp­ted to reboot please reboot. If you are promp­ted to reboot and don’t, the patch­er may not be able to patch the files!
8. 运行C:\DRIVERS WIN 补丁 BTWPatcher.exe
9. Click on the apply but­ton to patch the drivers. If the patch­er can­not com­plete the patch, please reboot into safe­mode and re-run the patcher.
10. 如果你有一个PC卡, extract the con­tents of the file data1.cab to the main install­a­tion dir­ect­ory. 在写的所有文件
11. If you have a 3Com Wire­less Bluetooth PC Card ver­sion 3.0 (3CRWB6096B) down­load the device recog­ni­tion file for the card from [ [int­link id=“741” type=“page”]下载[/intlink] ]and save the file to the install­a­tion directory
12. If you have dis­con­nec­ted your Bluetooth device (as instruc­ted in the pre­par­a­tions) you should now con­nect it
13. Win­dows will prob­ably install new hard­ware. Wait until the hard­ware install­a­tion is complete.
14. 重新启动计算机.
15. If you have a Microsoft Bluetooth key­board or mouse please read the MS 输入设备部分
16. If you use a laptop or note­book that uses pro­pri­et­ary soft­ware to “turn on” an intern­al Bluetooth device, please read the Intern­al Devices section.

安装后

Look for the Bluetooth icon in the sys­tem tray at the bot­tom right and if it is white with a blue back­ground ( ) then you have suc­cess­fully com­pleted the driver install­a­tion. If the icon isn’t present or is red with a blue back­ground ( ) then you should read the “What to do if it did­n’t work” sec­tion below. If you suc­ceed and you have any devices not lis­ted on the Tested Devices page, 请让我知道，他们的工作! (看到如何将有关页面 [int­link id=“1326” type=“page”]contact me[/intlink]).

What to do if it didn’t work

Don’t pan­ic, as I said in the intro­duc­tion, “There are often some dif­fi­culties get­ting everything to work cor­rectly, but with a little patience and care you’ll get it fixed.”

• Check that you fol­lowed the pre­par­a­tion instruc­tions correctly.
• Double check that you did­n’t make any mis­takes in the above procedure
• Read the Troubleshoot­ing section.
• 阅读F.A.Q. and see if your prob­lem is lis­ted there.
• Try some of the oth­er resources lis­ted on the introduction.
• If you’ve tried all the above and still haven’t got any­where then please [int­link id=“1326” type=“page”]contact me[/intlink].

当一切工作

When everything is work­ing I sug­gest you read the soft­ware sec­tion for inform­a­tion on how to setup some of the more pop­u­lar applic­a­tions. I have details of how to setup and use Logo­Man­ager, 诺基亚PC套件, 彩车移动Agent, and Oxy­gen Phone Man­ager. The Wid­comm drivers also have many func­tions and fea­tures built in that you can use.

[nex­t­page title=“Software”]

软件

There are many dif­fer­ent soft­ware suites avail­able for com­mu­nic­a­tions between Mobile Phones and your PC. I have writ­ten brief setup guides for the most pop­u­lar suites.

诺基亚PC套件 4.88 在 Windows XP / 2003 上安装

• Nokia PC Suite is avail­able from 诺基亚.
• 安装诺基亚PC套件
• 您的手机上启用蓝牙
• Open “My Bluetooth Places” from the desktop
• Click “View Devices In Range” or “Find Bluetooth Devices”
• 右键单击出现在手机上
• 配对的设备.
• 输入您所选择的任何密码.
• 输入手机相同的代码
• 手机上的图标，双击 (this will dis­cov­er avail­able services)
• Double click on “Nokia PC Suite on…” To con­nect this service
• Right click on “Nokia PC Suite on…” and select properties
• Check which seri­al port it is using (在我的例子，它使用COM5)
• 关闭此窗口
• Double click on the Nokia PC Suite icon in the sys­tem tray
• Click on blue dia­mond but­ton if it isn’t already selected
• Click on “Nokia Bluetooth Phone”
• 点击申请
• In the win­dow that appears choose the com port that you found earli­er (我的是COM5)
• Click “con­nect”
• 单击确定关闭诺基亚窗口
• Suc­cess! You can now use the PC Suite pro­grams found on the start menu

[google_adsense]

Windows XP / 2003 上的 LogoManager 安装

• Logo­man­ager is avail­able from LogoManager.co.uk
• Install Logo­Man­ager (I am using ver­sion 1.30 在这个例子中)
• 您的手机上启用蓝牙
• Open “My Bluetooth Places” from the desktop
• Click “View Devices In Range” or “Find Bluetooth Devices”
• 右键单击出现在手机上
• 配对的设备.
• 输入您所选择的任何密码.
• 输入手机相同的代码
• 手机上的图标，双击 (this will dis­cov­er avail­able services)
• Double click on “Nokia PC Suite on…” To con­nect this service
• Right click on “Nokia PC Suite on…” and select properties
• Check which seri­al port it is using (在我的例子，它使用COM5)
• 关闭此窗口
• Load Logo­Man­ager
• 打开工具: 选项
• Click the “Change” but­ton at the top
• 选择以下:Connection Type = “Seri­al Cable“Cable Type = “Bluetooth Seri­al Port“COM Port = The port you made a note of earli­er (在我的例子COM5)
• 点击OK
• Suc­cess! Your Logo­Man­ager should now show that it is connected

F.M.A. 在 Windows XP / 2003 上安装

• Float’s Mobile Agent is avail­able from Source­Forge
• Install Float’s Mobile Agent (I am using ver­sion 0.10.31b in this example)
• 您的手机上启用蓝牙
• Open “My Bluetooth Places” from the desktop
• Click “View Devices In Range” or “Find Bluetooth Devices”
• 右键单击出现在手机上
• 配对的设备.
• 输入您所选择的任何密码.
• 输入手机相同的代码
• 手机上的图标，双击 (this will dis­cov­er avail­able services)
• Double click on “Com1 on …”
• The soft­ware should con­nect and tell you which COM port is con­figured for the ser­vice (在我的例子是COM3)
• 负载F.M.A.
• 打开工具: 选项
• Select “use seri­al port” and set the port to the one that was con­figured about (COM3在我的例子)
• Click “ok”
• Click on the con­nect button
• Suc­cess!

Oxygen Phone Manager II 在 Windows XP / 2003 上的安装

• Oxy­gen Phone Man­ager is avail­able from Oxy­gen Software
• Install Oxy­gen Phone Manager
• 您的手机上启用蓝牙
• Open “My Bluetooth Places” from the desktop
• Click “View Devices In Range” or “Find Bluetooth Devices”
• 右键单击出现在手机上
• 配对的设备.
• 输入您所选择的任何密码.
• 输入手机相同的代码
• 手机上的图标，双击 (this will dis­cov­er avail­able services)
• Double click on “Nokia PC Suite …”
• The soft­ware should con­nect and tell you which COM port is con­figured for the ser­vice (即时我的例子是COM5)
• 加载OPM II
• Open “Options” from the “Tools” menu
• Select the top option “Con­nec­tion & Common”
• Click the “add” but­ton at the top right
• From the pull down list that appears select “COM X (Bluetooth Com­mu­nic­a­tions Port)” where X is the num­ber of the COM port you noted earli­er (我的例子是5)
• Click “OK”
• Suc­cess!

链接软件套件

• Sony-Eric­sson PC Suite for the P800 / P900
• Logo­Man­ager for Nokia Phones
• Float’s Mobile Agent
• Oxy­gen Phone Man­ager II for Nokia Phones
• Oxy­gen Phone Man­ager II for Sym­bi­an 操作系统 手机
• 诺基亚PC套件 4.88 对于6310i / ⁶³¹⁰⁄₈₉₁₀
• 适用于 6250 的诺基亚 PC 套件
• 诺基亚PC套件 1.10 对于 6600
• 诺基亚PC套件 1.20 对于7650
• 诺基亚PC套件 3.0 对于 3650
• 诺基亚PC套件 ³⁶²⁰⁄₃₆₆₀
• 诺基亚PC套件 16.04 for the N‑Gage
• 诺基亚PC套件 6.20 为 ⁶²³⁰⁄₆₂₆₀ / ⁶⁶⁵⁰⁄₆₈₁₀ / ⁶⁸²⁰⁄₇₆₀₀ / 7610 / 8910一世

[nex­t­page title=“Networking”]

联网

Bluetooth Personal Area Networks

The Bluetooth spe­cific­a­tion sup­ports the use of Bluetooth for net­work­ing between devices.
If you have a PC with a Bluetooth adaptor and a Bluetooth enabled 掌上电脑, 笔记本电脑,
or oth­er device that sup­por­ted net­work­ing, you should use the fol­low­ing inform­a­tion to set up a net­work connection.
Net­work con­nec­tions between a PC and anoth­er device can be used for file and print shar­ing, and also for Inter­net access.
A typ­ic­al example of a Bluetooth PAN would be if you have a Bluetooth enabled desktop PC with broad­band access,
and a laptop with Bluetooth sup­port you can turn your desktop PC into a W.A.P. (wire­less access point)
and use the Inter­net access on your laptop without a need for wires.

The setup of a Bluetooth PAN is depend­ent upon your exist­ing con­fig­ur­a­tion, below are sev­er­al options…

• Bluetooth net­work­ing for file and print shar­ing only
• Provid­ing Inter­net access to anoth­er device from a PC with a dir­ect Inter­net connection
• Provid­ing Inter­net access to anoth­er device from a PC that has Inter­net access through anoth­er net­work (e.g. a cor­por­ate LAN)

If you need more detailed or spe­cif­ic inform­a­tion than I have provided, there are some oth­er excel­lent guides for spe­cif­ic plat­forms available

• If you have a Palm, you can go to Whizoo.com
• If you have an iPaq, you can go to PC-Counselor.com
• If you are net­work­ing between 2 PC’s there is more inform­a­tion avail­able at GeekZone.co.nz

[google_adsense]

Setting up a Bluetooth Personal Area Network for File & Print Sharing

• Make sure you have fully fol­lowed the main guide
• Pair the devices
• Open the con­fig­ur­a­tion options on the primary PC
• Select the “loc­al ser­vices” tab
• Choose “net­work access” and click on “prop­er­ties”
• Make sure it is set to “start-up auto­mat­ic­ally”, and change the pull down option to “allow oth­er devices to access the Internet/LAN via this computer”
• If the device you want to con­nect FROM does not sup­port Bluetooth secur­ity prop­erly you need to down­load and run the Dis­able Net­work Secur­ity Registry Frag­ment from the down­loads page
• Make sure that the Bluetooth net­work con­nec­tion is enabled on both devices
• Share the rel­ev­ant folders or print­ers on the main PC
• Con­nect the net­work access option the same way as any oth­er Bluetooth service
• If you want to share files, 资料夹, or print­ers in both dir­ec­tions you should carry out the above pro­ced­ure on both PC’s

Setting up a Bluetooth Personal Area Network for Internet Connection Sharing

This meth­od of Inter­net access shar­ing will only work when the host PC has a dir­ect Inter­net con­nec­tion. The host PC must be using Win­dows Me, 2000, XP或 2003 because it uses Inter­net Con­nec­tion Sharing

• Make sure you have fully fol­lowed the main guide
• Pair the devices
• Open the con­fig­ur­a­tion options on the primary PC
• Select the “loc­al ser­vices” tab
• Choose “net­work access” and click on “prop­er­ties”
• Make sure it is set to “start-up auto­mat­ic­ally”, and change the pull down option to “allow oth­er devices to access the Internet/LAN via this computer”
• If the device you want to con­nect FROM does not sup­port Bluetooth secur­ity prop­erly you need to down­load and run the Dis­able Net­work Secur­ity Registry Frag­ment from the down­loads page
• Click on the “con­nec­tion shar­ing but­ton and if read the help file if you need more information
• Make sure that the Bluetooth net­work con­nec­tion is enabled on both devices
• Share the rel­ev­ant folders or print­ers on the main PC
• Con­nect the net­work access option the same way as any oth­er Bluetooth service
• If you want to share files, 资料夹, or print­ers in both dir­ec­tions you should carry out the above pro­ced­ure on both PC’s

Setting up a Bluetooth Personal Area Network for Internet Connection Sharing

This meth­od of Inter­net access shar­ing will only work when the host PC has Inter­net access through a LAN. The host PC must be run­ning Win­dows 2000, XP或 2003 because it uses a Net­work Bridge

• Make sure you have fully fol­lowed the main guide
• Pair the devices
• Open the con­fig­ur­a­tion options on the primary PC
• Select the “loc­al ser­vices” tab
• Choose “net­work access” and click on “prop­er­ties”
• Make sure it is set to “start-up auto­mat­ic­ally”, and change the pull down option to “allow oth­er devices to access the Internet/LAN via this computer”
• If the device you want to con­nect FROM does not sup­port Bluetooth secur­ity prop­erly you need to down­load and run down­load and run the Dis­able Net­work Secur­ity Registry Frag­ment from the down­loads page
• Open the “Net­work Con­nec­tions” con­trol panel
• Select your primary LAN con­nec­tion (usu­ally called “Loc­al Area Net­work”), 然后, hold­ing con­trol, also select your Bluetooth net­work con­nec­tion (usu­ally called “Bluetooth Network”)
• Right click on either of the selec­ted con­nec­tions, and choose “Bridge Connections”
• Make sure that the Bluetooth net­work con­nec­tion is enabled on both devices
• Share the rel­ev­ant folders or print­ers on the main PC
• Con­nect the net­work access option the same way as any oth­er Bluetooth service
• If you want to share files, 资料夹, or print­ers in both dir­ec­tions you should carry out the above pro­ced­ure on both PC’s

[nex­t­page title=“Troubleshooting”]

故障排除

驱动程序问题

It didn’t work: 最先要仔细检查

• If you have an icon in the sys­tem tray that is white on a blue back­ground ( ) then you should skip the inform­a­tion on this page — your driver is cor­rectly installed already!
• Check that you fol­lowed the pre­par­a­tion instruc­tions correctly.
• Double check that you did­n’t make any mis­takes in the main procedure.
• If run­ning the patch­er pro­duced an error, reboot into safe­mode and run the patch­er again
• If you wer­en’t logged on as a user with Admin­is­trat­or rights, try the pro­ced­ure again with an account that does
• If you have anti-vir­us soft­ware run­ning dis­able it and retry the procedure
• If you have a fire­wall installed on your PC make sure that the Wid­comm Bluetooth soft­ware has unres­tric­ted access — remem­ber, Bluetooth is a net­work­ing technology!
• 如果您正在使用一台笔记本电脑 / note­book with an Intern­al device that came with pro­pri­et­ary soft­ware, read the Intern­al devices section.
• If you did­n’t reboot after run­ning the patch­er, 请现在就这样做

The list above didn’t help and your device is a PC Card (PCMCIA)

Some PC Cards are a little tricky to loc­ate a driver for. 阅读 PC 卡部分.

It still doesn’t work

It is pos­sible that Win­dows installed anoth­er driver for you device (如Microsoft驱动程序) instead of the Wid­comm driver. Read the Manu­al Install section.

It still doesn’t work and your device is a USB 设备和不在测试的器件部分中列出

It is pos­sible that your device is not included in the list of devices that the drivers can recog­nise by default. 阅读新 USB 设备部分.
[google_adsense]

It still doesn’t work

• Try remov­ing everything Bluetooth related from the com­puter, and try the pro­ced­ure right through from the begin­ning again.
• 阅读F.A.Q.

MS 输入设备

微软的Intelli-驱动程序混乱

Many people have advised me to avoid Intel­li­Type 5.0 and Intel­li­Point 5.0 司机像瘟疫. Unfor­tu­nately, 安装来自微软的Intelli司机 光盘 将安装微软的蓝牙驱动程序, which break the Wid­comm driver install­a­tion. Without the Intelli drivers you will not be able to use the extra but­tons on your key­board or mouse. The solu­tion? 安装旧的Intelli司机! All the oth­er wire­less key­boards and mice pro­duced by Microsoft have the same or very sim­il­ar addi­tion­al keys to the Bluetooth mouse and keyboard.

从哪里获得前辈的Intelli驱动程序

找到他们的 [ [int­link id=“741” type=“page”]下载[/intlink] ] 页面

内置设备

Laptop’s with Proprietary Software

Some laptops require their own soft­ware installed as well as the Wid­comm drivers. 东芝, and Sony both pro­duce Bluetooth enabled laptops that have a soft­ware “switch” to dis­able or enable Bluetooth. If your device isn’t detec­ted after the main install­a­tion you may need to install the ori­gin­al software.

Installing Toshiba’s proprietary Bluetooth software

• Down­load the Toshiba Bluetooth Mon­it­or soft­ware from Toshiba 4.18 MB
• Extract the Toshiba soft­ware to a tem­por­ary folder and copy the fol­low­ing files to the fol­low­ing locations:

• Open “Device Man­ager”, and unin­stall all of the Toshiba Bluetooth Devices which can be found in the “Bluetooth”, “USB”, “Ports”, and “Net­work” sections.
• Use “Add/Remove Pro­grams” to unin­stall the Toshiba Bluetooth software
• 重启
• 运行C:\东芝 MS_Bluetooth BtMonInst.exe
• Right click on the Bluetooth Mon­it­or in the sys­tem tray, and select “Power > ON”
• Win­dows should now install Devices. Your Bluetooth Sys­tem Tray should turn white.

If the sys­tem tray does­n’t turn blue and white you may still have a Toshiba / 安装了Microsoft驱动程序. You should read the Manu­al Install section.

手动安装

手动安装驱动程序

The manu­al driver install­a­tion should only be attemp­ted after the Wid­comm soft­ware has been installed. The descrip­tion below describes how to replace the Microsoft driver with the Wid­comm driver. If the Microsoft driver isn’t present you will not be able to com­plete the fol­low­ing pro­ced­ure. If you have a PC Card you should have already read the PC Cards sec­tion. The meth­od for doing a manu­al driver update is dif­fer­ent on dif­fer­ent ver­sions of Win­dows, please use the pro­ced­ure that cor­res­ponds to your ver­sion of Windows

Windows XP中 / 2003 强制手动安装驱动程序

1. Open the sys­tem con­trol pan­el, and in the “Hard­ware” tab, and click on “Device Manager”
2. Expand the “Bluetooth Radi­os” sec­tion of the device list
3. There might be a “Microsoft Bluetooth Enu­mer­at­or” and anoth­er device listed
4. Double click on the oth­er device, and in the “driver” tab, click on “update driver”
5. Select “Install from a list or spe­cif­ic location”
6. Select “Don’t search, I will choose the driver to install”
7. Click on “Have disk”
8. Type in “C:\Drivers\Win\BDCACT”
9. 点击OK
10. 应该有 1 列出的单个设备
11. 点击下一步
12. 点击OK
13. The sys­tem tray icon should now be white & 蓝色. If it isn’t, 重新启动电脑.

PC卡

My PC Card didn’t find a driver

• 你进行部分 10 主要指令?
• Have you read the Manu­al Driver Install­a­tion instructions?
• 如果你有一个3Com的PC卡, 见下文

我有一个3Com的PC卡

I have a cus­tom driver file avail­able for ver­sion 3 3Com公司的PC卡. Down­load it from the [int­link id=“741” type=“page”]下载[/intlink] page and save it to the main install­a­tion folder (C:\DRIVERS WIN BDCACT ). If you have a ver­sion 2 卡, I do not cur­rently know a meth­od of installing these. A firm­ware update may be possible.

新 USB 设备

我的 USB Device wasn’t found…

一切 USB 装置具有VID (供应商内径) 和PID (产品内径). If your device was­n’t found it is pos­sible that it’s ID is not lis­ted in the Wid­comm driver. The Wid­comm drivers will only install for devices they recog­nise, and they recog­nise devices based on their VID and PID. The install­a­tion file btwusb.inf con­tains a list of USB VIDs and PIDs that the drivers will recog­nise. 所有 USB devices will work with the Wid­comm stack, but the ID’s for some of them are not included with the drivers. 如果不包括您的设备，则需要添加它.

The major­ity of note­books / laptops with intern­al Bluetooth use an intern­al USB solu­tion. If you have a note­book / laptop and are exper­i­en­cing prob­lems get­ting the driver work­ing, you should read this sec­tion, even if you don’t have an actu­al USB 加密狗插入.

如何查找设备的VID和PID

This meth­od will enable you to find the VID and PID for your USB Bluetooth hard­ware before it has a driver installed.

• Con­nect your Bluetooth dongle, and let Win­dows add it as an “Unknown device”
• Open “sys­tem inform­a­tion” from start/programs/accessories/system tools/system information
• Expand “Com­pon­ents”
• Select “USB”
• Loc­ate the device in the list
• It will have an ID in the fol­low­ing form: USB\VID_XXXX&PID_YYYY ZZZZZZZZZZZZZ
• 记下VID的 (在XXXX) 和PID (在YYYY)

如何更新的VID和PID驱动程序的 USB 加密狗

This ser­vice is no longer func­tion­al, 抱歉

• 填写表格下面与您的设备的详细信息.
• After you have suc­cess­fully sub­mit­ted your device details, 右键点击 >here and select “save tar­get as”.
• Save the file into the install­a­tion dir­ect­ory (C:\DRIVERS WIN BDCACT ). Over­write the old file.
• 删除你的 USB 加密狗.
• Restart Win­dows.
• 重新插入加密狗.
• If Win­dows prompts you for a driver, 它指向C:\DRIVERS WIN BDCACT
• If you are not promp­ted for a driver and the sys­tem tray icon remains red you may need to start the install­a­tion pro­ced­ure again from the begin­ning using the new file.

设备已经支持

卸载

如何卸载的Widcomm驱动程序

The Wid­comm drivers should have a nor­mal add/remove option in the con­trol pan­el, regard­less of who sup­plied them. If your install­a­tion has become dam­aged, and for some reas­on you can­not use the nor­mal unin­stall­a­tion meth­od, the details below should help you remove the Wid­comm drivers from your system.

步骤

• Make a back-up of your sys­tem registry
• Run “regsvr32 ‑u BtNeighborhood.dll”
• Run “btstackserver.exe /unregserver”
• Run reged­it and delete the WIDCOMM key from HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE
• Delete “bt*.dll”, “btcpl.cpl”, and “bt*.manifest” from your sys­tem folder (this var­ies depend­ing on which ver­sion of Win­dows you are using)

[nex­t­page title=“F.A.Q.”]

F.A.Q.

Windows didn’t find a driver for my device

There are sev­er­al pos­sible causes of this problem.

1. 设备的PID VID和不在btwusb.inf文件. 看看VID和PID列表页面了解更多信息.

2. You have a “Microsoft Driver” Infec­tion. Have a read of the Manu­al Driver Install­a­tion page

3. 您的设备出现故障. Try the ori­gin­al driver that came with the device. 如果失败的话，你需要一个新的硬件.

4. 你没有使用 USB 加密狗. I’m not quite sure yet how these work, 可能存在的问题. [int­link id=“1326” type=“page”]保持联系[/intlink] 跟我.

I can’t customise the buttons on my Wireless IntelliMouse Explorer for Bluetooth

See the Microsoft Input sec­tion of the Driver Install­a­tion page.

I get the error “There was a problem installing this hardware. 在安装此设备的过程中出错. The required section was not found in the inf”

If you are con­nec­ted to the Inter­net, Win­dows will some­times try to update your driver from Win­dowsUp­date online. Make sure you are dis­con­nec­ted from the ‘net and try again. You may need to do a manu­al driver installation.

I get the error “There was a problem installing this hardware. 在安装此设备的过程中出错. The system cannot find the file specified”

Try dis­con­nect­ing from the Inter­net (如上详述). You may need to do a manu­al driver installation.

我的诺基亚手机不会连接或断开不断

You may not have new enough firm­ware. This is a par­tic­u­larly com­mon prob­lem with the Nokia 6310i. You need to read the Nokia firm­ware inform­a­tion page. If your soft­ware is try­ing to con­nect on “COM0” you need to change the set­tings (see ques­tion: The driver install­a­tion works cor­rectly, but when I try to use the seri­al port ser­vice it tries to con­nect on “COM0” and fails)

我使用的是蓝牙键盘，我不断收到一个弹出当我按下CAPSLOCK键或NumLock键

Down­load and run the Key Indic­a­tion registry frag­ment from the [int­link id=“741” type=“page”]下载[/intlink] 页面

My device appears to have a VID and PID of 0000 0000

更换你的设备. It’s broken.
[google_adsense]

I get the error “Your bluetooth software license does not include use with this Bluetooth device. [6]”

The file patch­er did­n’t patch the 3 files cor­rectly. 重新运行在安全模式.

我的iPaq经常下降到我的电脑的连接

I don’t have a solu­tion to this yet. I think it is a prob­lem with the iPaq soft­ware / firm­ware. If any­one knows of a solu­tion please [int­link id=“1326” type=“page”]请您联系我们[/intlink] 跟我.

驱动程序的安装要求一个licence.dat

Either your down­load and extrac­tion of the drivers was cor­rup­ted, or you have not run the .reg file included with the patched files pri­or to run­ning the main setup. You can try point­ing the request to “C:\Drivers\Win\Bdcact” (where you extrac­ted the IBM drivers), but it is prob­ably bet­ter to start the guide again from the beginning.

我使用蓝牙到我的电脑连接到我的手机，这样我可以用我的手机访问互联网. 上网似乎很慢

First gen­er­a­tion Bluetooth sup­ports 1Mbit con­nec­tions which is twice as fast as most broad­band Inter­net con­nec­tions. Second gen­er­a­tion Bluetooth devices should work at up to 2Mbits. The prob­lem is with the mobile phone, 没有蓝牙. Many phones only sup­port 9.6.KBit. 大多数人不会工作比28.8KBit快. You’ll have to wait for 3G net­works for fast Inter­net access through your mobile.

Eveything works but I get an icon in the system tray that says “Bluetooth Network — A Network Cable Is Unplugged”

This is nor­mal. The bluetooth drivers install sup­port for net­work­ing. If the icon both­ers you then open the “Net­work Con­nec­tions” folder and dis­able the “Bluetooth Net­work” connection.

My Dial-up and Fax Services don’t work after I have installed Bluetooth on Windows 2000 / XP / 2003 系统

You need to unin­stall and rein­stall the Fax and Dial-Up ser­vices. This can be done in add/remove programs/windows com­pon­ents, BUT by default many of the win­dows com­pon­ents are hid­den, includ­ing the Fax and DUN ser­vices. To show ALL of the win­dows com­pon­ents that can be selec­ted you need to carry out the fol­low­ing procedure:

• Open note­pad or a sim­il­ar text editor
• 打开文件C:\Windows\inf\sysoc.inf
• 做一个搜索和替换, 和替换 ‚hide, 同 „
• 保存的Sysoc.inf

请注意：: Some of the com­pon­ents take a long time to “untick” after you click on them. When you deselect the com­pon­ents you wish to rein­stall you will have to wait 10–15 seconds and then move the scroll­bar at the right hand side, 和蜱应该消失.

我的索尼爱立信R520m保持禁用蓝牙

I believe this is a prob­lem with the R520m, which will hope­fully be fixed with new firm­ware. I recom­mend con­tact­ing Sony-Eric­sson if you exper­i­ence this prob­lem. Until a firm­ware update becomes avail­able you can try switch­ing the phone off and back on, or using the “Mas­ter Reset” option.

我试图用一个多端口康柏与微软鼠标和响应时间很慢

This is a firm­ware issue. Com­paq don’t cur­rently sup­ply updated firm­ware, but it can be resolved by flash­ing the Mul­ti­port with the firm­ware update from TDK for their USB BT adapter

驱动程序安装工作正常, but when I try to use the serial port service it tries to connect on “COM0” and fails

Right click on the sys­tem tray icon and select open the con­fig­ur­a­tion options. Under the loc­al ser­vices tab click on “Add Seri­al Device” and fol­low the steps to add a new device. Under the “Cli­ent Applic­a­tions” tab click on “Add COM Port” and fol­low the steps. The names you use for the ser­vices do not mat­ter. Use this port instead of the default port.

I have a networking device that will not accept secure connections (there are some Bluetooth routers with this problem)

Down­load and run the Net­work Secur­ity registry frag­ment from the [int­link id=“741” type=“page”]下载[/intlink] 页面

I’m having problems getting my D‑Link DBT-120 to install

There are known firm­ware issues with the D‑Link dongles. Down­load an updated firm­ware from the [int­link id=“741” type=“page”]下载[/intlink] page and use the Firm­ware update pro­gram included with the Wid­comm drivers to update your dongle.

I get the following error: “no local bluetooth device detected”

You must manu­ally check that ALL of the fol­low­ing drivers have been updated the the ver­sion that you have installed. Check the fol­low­ing devices in device man­ager: the bluetooth device itself, all bluetooth com ports (there are usu­ally 2 of these), bluetooth net­work “card”, Bluetooth Audio

The Mrouter software does not see any Known or Unknown devices and refresh has no effect

If you have an intern­al modem that is using a COM port, use device man­ager to dis­able it, try using mrouter again, and once it has come to life, re-enable the modem

[nex­t­page title=“Advanced”]

先进

先进的信息

This is the sec­tion for those of you who would con­sider them­selves “tech­ies”. Any­one who does­n’t know what they’re doing should­n’t go any further.
I will not be held respons­ible for any­thing you break as a res­ult of read­ing the advanced section!

In this sec­tion there are details of how the pro­ced­ure works. There are also oth­er use­ful resources, includ­ing inform­a­tion on firm­ware for Nokia phones, 和 USB 设备. I have also included a com­plete file archive of all the use­ful Bluetooth related util­it­ies that I have.

注册表碎片

The registry frag­ment adds a single line into the registry. It is not neces­sary for many con­fig­ur­a­tions, but does­n’t cause any prob­lems, and gets over-writ­ten by the install­a­tion anyway
The line added is HKEY_CURRENT_USER\Software\Widcomm\BTConfig\Services\0004\AcceptOther which is a DWORD equal to 1

较新的btwusb.inf

I have added many device VID and PID com­bin­a­tions into the btwusb.inf file to add sup­port for those devices. The device sub­mis­sion page auto­mat­ic­ally updates the file with new devices.
[google_adsense]

文件补丁

The file patch­er patches 3 档: wbtapi.dll, bttray.exe和btstackserver.exe. It car­ries out the same 2 oper­a­tions on each file. Doing this enables the soft­ware to work with Win­dows 2003, and also enables the soft­ware to work with all devices. 对于IBM司机 2 编辑如下:
在十六进制字符串 3乙F5 75 0Ë3B FD 75 0一个 被替换 3乙F5 90 90 3B FD 90 90
在十六进制字符串 83 C4 04 85 F6 0F 85 1˚F 01 00 00 被替换为 83 C4 04 85 F6 90 90 90 90 90 90
The strings dif­fer between ver­sions but are usu­ally quite sim­il­ar, and using wild­cards the new patch­er can patch most versions.

诺基亚蓝牙手机: 固件更新通常需要!

Sev­er­al Nokia phones require firm­ware updates before they will sup­port Bluetooth cor­rectly. You can check your firm­ware revi­sion by typ­ing *#0000# on the phone’s keypad.

所需的最低固件版本

诺基亚6310i: 5.50

诺基亚 6230: 3.15

You can take your phone to a Nokia licensed repair shop and they will update the firm­ware for you for free as long as the phone is still with­in its Nokia war­ranty peri­od. 被警告，我知道的至少 1 case where a firm­ware update has caused the loss of all per­son­al­ised inform­a­tion stored on the phone. I strongly advise that you make a copy of any import­ant data from your phone before hav­ing it updated.

USB 设备固件

Sev­er­al people have asked about firm­ware updates for USB 蓝牙设备. Wid­comm used to sup­ply an updated firm­ware with their drivers, but new­er ver­sions have not come with an update. I have a gen­er­ic CSR Firm­ware that you can down­load if you think you NEED it. It is dated 31^英石-March-2004, and includes CSR’s HID sup­port that allows the use of Bluetooth Key­boards and Mice before the 操作系统 加载 (for example allows the use of a Bluetooth key­board to modi­fy BIOS 选项). The Wid­comm drivers are sup­plied with a firm­ware update util­ity for most devices, includ­ing CSR devices.

警告: Use this firm­ware update at your own risk!!

Down­load the update file from the [int­link id=“741” type=“page”]下载[/intlink] 页面.