DIY মিডিয়া হোম লোগো

আপনার নিজের হোম থিয়েটার এবং হাই ফাই সেটআপ নকশা ও নির্মাণের জন্য চূড়ান্ত সাইট.

4Humax PVR-9200Tপিসি Humax PVR 9200T থেকে ফাইল কপি করুন

আমি Humax PVT-9200T দ্বৈত Freeview PVRs কয়েক মালিক, both of which are now quite full with recor­ded pro­grams. Humax have provided a pro­gram called eLinker, but it isn’t very good. A good altern­at­ive is Humax Media Con­trol­ler but unfor­tu­nately it does­n’t work with Win­dows x64, হিসাবে মাইক Dimmick explains. Thank­fully, মাইক এছাড়াও ফাইল কিছু প্যাচিং করে একটি সমাধান তৈরি করেছে, Humax মিডিয়া কন্ট্রোলার এখন উইন্ডোজ সফলভাবে ব্যবহার করা যেতে পারে, যাতে 7 x64. The only issue is that Win­dows must be booted with Driver Sign­ing Enforce­ment disabled.

Update Apr 2024

Mike’s site is still up but the link to HumaxPVR.zip that he offered is now dead.
I found a copy of Humax Media Con­trol­ler with Mike’s driver added that I down­loaded and e‑mailed to someone around 14 years ago still intact in my old gmail and have now res­cued it.
You can down­load it dir­ectly এখানে

উত্তর দিন

4 মন্তব্য

Rরজার

I’m try­ing to loc­ate a copy of the soft­ware mike cre­ated to sup­port Win­dows x64 (HumaxPVR.zip).…the down­load link on his Blog­ger page is no longer func­tion­al …it is a very old piece of soft­ware now.
Should any­one be able to point me in the dir­ec­tion of a copy, I’d appre­ci­ate it.

উত্তর
Rরজার

জন, ফাইলের জন্য ধন্যবাদ.
Unfor­tu­nately I don’t seem to be able to get the cor­rect driver to install.
I’m bypassing the unsigned driver pro­tec­tion and am offered HumaxSTBAlternate.inf as the driver installer .…but the driver installed by this is described as writ­ten by ‘Humax STB’ ver­sion 0.1.12.1 20/3/2007
I get a device con­nec­tion error on run­ning Humax.bat

উত্তর
JSজন Scaife

Hi Roger
That is frus­trat­ing. I assume you’re on win­dows 10 অথবা 11? This was from the Win­dows 7 days so that might be the issue. It sounds like the cor­rect driver is installing — the inf file was cre­ated by Humax and mod­i­fied by Mike D but still shows as ver­sion 0.1.12.1 as you say.
I assume you’ve con­nec­ted the humax to the com­puter with a ইউএসবি cable and then installed the driver for the “unknown device” or whatever the humax shows up as?
There are instruc­tions here for how to use the drivers — http://www.enigma.eclipse.co.uk/humax/HumaxMediaController.htm
Make sure you’ve rebooted with driver sign­ing enforce­ment turned off first (which is quite faffy on win 10 i believe) — tips on how to do that here — https://answers.microsoft.com/en-us/windows/forum/all/permanent-disable-driver-signature-verification/009c3498-bef8-4564-bb52-1d05812506e0

উত্তর