I use a ConBee II یوایسبی stick for my zigbee mesh in Home Assistant. I wanted to update the firmware and found it is easiest to do this by shutting down HA, unplugging the stick and using a windows machine to update it, then putting it back into the HA system and booting HA back up. There are full instructions for the process in Windows on ڈریسڈن ایلکٹرونک کی ویب سائٹ
Posts Tagged: فرم ویئر
0ہیک ویوژن کیمروں سے زیادہ سے زیادہ فائدہ اٹھانا
I have a 4Mpix HikVision mini dome camera for CCTV on the house. It provides a pretty reasonable picture considering the price, but the management interface is a bit rubbish and getting it set up with anything is a bit of a nuisance, so heres some notes on getting it working…
... مکمل آرٹیکل پڑھیں
3SmartThings ساتھ سستا وائی فائی SmartPlugs
SmartThings ہم آہنگ سمارٹ پلگ سے annoyingly مہنگی ہیں - عام طور پر کے ارد گرد £ 40. یہ کے بہت سے خریدنے پر غور کرنے کے لئے بہت مہنگا ہے. تاہم وائی فائی موجود پلگ رہے ہیں £ 10 کے ارد گرد سرکاری طور SmartThings ساتھ کام نہیں کرتے اس کے لئے آن لائن دستیاب. ان میں سے بیشتر نئے firmware SmartThings کے ساتھ کام کریں گے کے ساتھ reflashed جا سکتا ہے جس ESP8266 چپ پر مبنی ہیں. میں ان پلگ ہیکنگ کے ساتھ میری آزمائش اور فتنوں دستاویز ذیل میں
... مکمل آرٹیکل پڑھیں
2Seagate کی Momentus XT کے ساتھ مسائل کو درست کریں
I’ve had problems with the new Seagate Momentus XT harddrive in my newest HTPC. The PC was locking up every 48 hours or so (which may have been related to standby), was occasionally jerky, and upon reboot would often refuse to boot with an error about a missing boot device, which could only be fixed with a hard power cycle. There is a firmware update for the drive to SD25 but this didn’t resolve the issue. However, after I changed the power management settings in Windows 7 to never spin-down the harddrive, the problems all went away. Success!
اپ ڈیٹ (14-Sept-2011). Seagate has released firmware SD28. There are reports that this fixes several issues and is a worthwhile update.
2NEODIGITS / HELIOS نیٹ ورک میڈیا کھلاڑیوں
I recently had cause to resurrect my old NeoDigits Helios X3000 network media player, and noticed that Helios have deceased. Sadly this means links to their software and firmware are no longer available. Thanks to علاج کے شریواستو اور myce پر شان میں نے متبادل لنکس کو تلاش کرنے کے قابل تھا, اگرچہ دسمبر کے طور پر 2012 these are no longer active either. Fortunately I grabbed everything whilst I still could.
“Hi James I realise it has been a long while, but I just checked this on windows 11 (build 23H2)…”