I’ve been suing the MiFlora Home Assistant integration to get data on various house plants for a while. However along the way I’ve had to overcome various hurdles including limited range of bluetooth, battery life issues, and getting the battery values to report. I finally seem to have cracked all of these and now have a system that works reliably with lots of plants around the house. I’ve summarised what I’ve used below.
পোস্ট করেছেন: জন Scaife
0
0
হোম অ্যাসিস্ট্যান্ট টুইক
I’ve made a number of improvements to my home assistant instance of late and wanted to document what they were
... সম্পূর্ণ প্রবন্ধ পড়ুন
1
হোম অ্যাসিস্ট্যান্ট থেকে যেকোনো ডিভাইস সরান
I’ve now been using home assistant for several years and most of the early challenges and learning-curves have been over-come. কীভাবে কখনও, there has been a long-standing issue that is a constant frustration — removing old devices doesn’t have a standard approach and in some case is impossible from the গ্রাফিক্যাল ইউজার ইন্টারফেস. যদিও উপায় আছে.
... সম্পূর্ণ প্রবন্ধ পড়ুন
0
ওয়ার্ডপ্রেসে হোভারে বর্ধিত চিত্র দেখান
As part of the recent improvements I’ve been making to various websites I wanted to make images in galleries show enlarged versions when hovered over. বেসিক দিয়ে এটি করা সিএসএস is fairly trivial, but I didn’t just want to expand the original image, আমি চেয়েছিলাম ব্রাউজারটি একটি নতুন দখল করুক (larger) image too…
... সম্পূর্ণ প্রবন্ধ পড়ুন
0
উল্লম্বভাবে ডিফল্ট ওয়ার্ডপ্রেস গ্যালারীতে চিত্রগুলি কেন্দ্র করুন
I couldn’t believe a google search didn’t already turn up the answer for this — it’s crazy that you can’t just vertically-center the images in a wordpress simple image gallery. After much faffing with সিএসএস আমি একটি সহজ উত্তর খুঁজে পেয়েছি
... সম্পূর্ণ প্রবন্ধ পড়ুন
0
ওয়ার্ডপ্রেস সহ স্বয়ংক্রিয়ভাবে এভিফ চিত্র তৈরি করুন এবং পরিবেশন করুন
I have spent quite a lot of time optimising the performance of this site, and as part of ongoing work I monitor new technologies that could help improve the speed for visitors. I’ve been tracking the adoption of next-generation image formats for a while and with support by web browsers now fairly widespread it was time to figure out how to make use of these new formats in wordpress.
... সম্পূর্ণ প্রবন্ধ পড়ুন
0
স্ক্রিপ্টের সাহায্যে উইন্ডোজ ডেস্কটপ স্লাইডশো সক্ষম করুন
I’ve been updating my unattended windows deployment setup recently, and one of the things I wanted to enable was the slideshow wallpaper with the location set to my wallpapers location on my server. This isn’t as straight-forward as it ought to be, but after bit of fiddling around I figured out how to do it fairly simply.
... সম্পূর্ণ প্রবন্ধ পড়ুন
0
সংরক্ষিত ডিএইচসিপি নামের উপর ভিত্তি করে পিসির নাম পরিবর্তন করতে ব্যাচ স্ক্রিপ্ট
I use WDS on a standalone server to set up new পিসি and to reimage পিসি when they have ended up mangled beyond repair. With a good number of পিসি in my own house it is useful to reimage them ocasionally when swapping or upgrading hardware. Most of this process is now automated by an unattend.xml file but one step the unattended process doesn’t seem to support is renaming পিসি back to their original name.
... সম্পূর্ণ প্রবন্ধ পড়ুন
0
আয়োটেক ডোরবেল 6 in HA — how to trigger the bell
I’ve had a Z‑Wave AeoTec Doorbell 6 for a while and had it linked to Home Assistant successfully, but have never been able to trigger the bell from within home assistant. Until now…
... সম্পূর্ণ প্রবন্ধ পড়ুন
0
হোম অ্যাসিস্ট্যান্টের জন্য কনবি II স্টিকের ফার্মওয়্যার আপডেট করা
I use a ConBee II ইউএসবি stick for my zigbee mesh in Home Assistant. I wanted to update the firmware and found it is easiest to do this by shutting down HA, unplugging the stick and using a windows machine to update it, then putting it back into the HA system and booting HA back up. There are full instructions for the process in Windows on ড্রেসডেন ইলেকট্রনিকের ওয়েবসাইট
সাম্প্রতিক মন্তব্য