I’ve now got around 30 tasmota-based smart plugs around the house. I’ve recently been tinkering with the settings on a few to optimise them for the roles they have
... पढ़ें पूर्ण अनुच्छेद
पोस्ट वर्गीकृत: स्मार्ट घर & IoT
0Problems flashing an ESP32
I recently needed to set up a new ESP32 device to extend my plant monitoring BLE network. I hit one or 2 issues doing so that were worth noting
... पढ़ें पूर्ण अनुच्छेद
4गृह सहायक में MiFlora संयंत्र सेंसर
I’ve been suing the MiFlora Home Assistant integration to get data on various house plants for a while. However along the way I’ve had to overcome various hurdles including limited range of bluetooth, battery life issues, and getting the battery values to report. I finally seem to have cracked all of these and now have a system that works reliably with lots of plants around the house. I’ve summarised what I’ve used below.
0गृह सहायक बदलाव
I’ve made a number of improvements to my home assistant instance of late and wanted to document what they were
... पढ़ें पूर्ण अनुच्छेद
1Home Assistant से कोई भी डिवाइस हटाएं
I’ve now been using home assistant for several years and most of the early challenges and learning-curves have been over-come. कैसे कभी, there has been a long-standing issue that is a constant frustration — removing old devices doesn’t have a standard approach and in some case is impossible from the जीयूआई. हालांकि एक रास्ता है.
... पढ़ें पूर्ण अनुच्छेद
0एओटेक डोरबेल 6 in HA — how to trigger the bell
I’ve had a Z‑Wave AeoTec Doorbell 6 for a while and had it linked to Home Assistant successfully, but have never been able to trigger the bell from within home assistant. Until now…
... पढ़ें पूर्ण अनुच्छेद
2गृह सहायक के लिए कॉनबी II स्टिक पर फर्मवेयर अपडेट करना
I use a ConBee II यूएसबी stick for my zigbee mesh in Home Assistant. I wanted to update the firmware and found it is easiest to do this by shutting down HA, unplugging the stick and using a windows machine to update it, then putting it back into the HA system and booting HA back up. There are full instructions for the process in Windows on ड्रेसडेन एलेक्ट्रोनिक की वेबसाइट
2गृह सहायक में वायु गुणवत्ता
I recently wrote about how to show bin collection information in Home Assistant, and my next project was to pull some air quality information. Fortunately I have a ‘Tado’ account which meant I could pull this information from their एपीआई using the following code
... पढ़ें पूर्ण अनुच्छेद
0गृह सहायक में बिन संग्रह
I’ve been developing my Home Assistant based smarthome setup for around a year now (since leaving SmartThings) and after an initial steep learning curve I’ve been veyr happy with home assistant so I have started working to expand the things it does as I am conifdent it offers a long term basis for my smarthome. One thing I wanted to add was bin collection data to remind me which bin is due when. As I live in Sheffield I needed to pull this data from the local authorities out-sources provider (वेओलिया). The following details how I did this, building very much on the work of others who have done it already for other regions
... पढ़ें पूर्ण अनुच्छेद
0OpenZWave होम असिस्टेंट के साथ काम करना
I am slowly migrating my smarthome setup to HomeAssistant which, as with most open-source projects, is pretty unfriendly to start with and takes some learning to use. I have an Aeotec ZStick and an Aeotec Doorbell 6 which work via Z‑Wave and I wanted to customise the tones and reduce the volume a little. आपको लगता है कि यह सही होगा?
... पढ़ें पूर्ण अनुच्छेद
“Hi James I realise it has been a long while, but I just checked this on windows 11 (build 23H2)…”