0Entfernen Sie den Treiber, der das Booten von Windows verhindert

Ich habe kürzlich versucht, AMD StoreMI auf meinem Windows zu installieren 2022 Server. Großer Fehler – es konnte sofort nicht mit einem BSOD gestartet werden. Und das war kurz nach der Installation – ich hatte das Programm noch nicht einmal ausgeführt. Die erste Lektion ist also, der Software von AMD nicht zu vertrauen – absolut schockierend!

Alle-Wege-, in order to recov­er the situ­ation I did a bit of dig­ging on google. Turns out it is fairly easy to remove the prob­lem driver and get the sys­tem boot­ing again…

1. Cre­ate a USB boot­able win­dows 10+ media (I used a Win­dows 10 2022H2 USB drive which worked fine with my serv­er 2022 installieren). You can get the “Media Cre­ation Tool” free from Microsoft which will cre­ate this for you
2. Change the boot pri­or­it­ies and boot from the USB media
3. Choose “repair your com­puter” (NOT install!)
4. Choose troubleshoot and then “com­mand prompt”
5. Find the drive let­ter for the sys­tem drive your main install is on. It almost cer­tainly WON’T be on the C: Antriebs. Easi­est thing to do it try D: and then type “dir” and look to see if the con­tents of the drive are correct
6. To make sure the installed driver list will fit in the com­mand win­dow you have to make it lar­ger — use the com­mand mode con:cols=1000 lines=3000
7. Then use the com­mand dism /image:e:\ /get-drivers where e:\ is the drive you found in step 5.
8. All of the driver files will be called oem###.inf where ### is an increas­ing num­ber (by date). So the most recently installed (d.h.. the prob­lem) Fahrer(s) will have the highest number
9. In my case the 3 prob­lem drivers were called oem148.inf oem149.inf and oem150.inf. The ori­gin­al names for these were also shown which for StoreMI are called rccfg.inf, rcbottom.inf, and rcraid.inf
10. Remove each of the prob­lem drivers using the fol­low­ing com­mand (use it 3 times to remove 3 Treiber) dism /image:e:\ /remove-driver /driver:oem###.inf — don’t for­get to replace e:\ with the drive rel­ev­ant to you
11. Reboot the sys­tem. Hope­fully it will just boot straight up.
12. In my case it still did­n’t boot, but I was able to press F8 and select “last known good” which then did boot up suc­cess­fully. I then unin­stalled StoreMI and rebooted again to be sure it was com­pletely gone.

The following links had most of the information above

  • https://community.amd.com/t5/drivers-software/system-won-t-boot-after-installing-storemi/td‑p/368824
  • https://pureinfotech.com/uninstall-driver-recovery-environment-windows-10/

Dies nützlich gefunden? Bitte lassen Sie uns wissen, indem Sie einen Kommentar unten fallen. Wenn Sie bitte abonnieren möchten den Link oben rechts auf dem Menü abonnieren verwenden. Sie können auch unten unter Verwendung der sozialen Bindungen diese mit Ihren Freunden teilen. Prost.

Hinterlasse eine Antwort