0Nexus RealSilent 120 Logotipo del ventilador de naranjaSilenciosa PC de alto rendimiento

Just a quick post with the details of how I improved cool­ing and lowered noise in my main PC simply by mov­ing the case fans…


los CPU is a Pen­ti­um Dual Core E6300, offi­cially a 2.80GHz part. I’m run­ning it at 3.20GHz with a 400MHz bus. The GPU is an ATi Radeon HD4850 with a slight over­clock (650MHz core, 1000MHz RAM).  Everything is run­ning on nor­mal voltages, and all power sav­ing fea­tures are enabled, so when the sys­tem is idle the CPU clocks down to 2.40GHz and the GPU core clocks down to 500MHz.

Both are tech­nic­ally fan­less and rely on the air­flow provided by the 3 case fans — Nex­us Real Silent 120mm fans, 2 of which are intake and 1 of which is in the PSUI have used the vent hole in the bot­tom of the case (An ori­gin­al Cool­er­Mas­ter Stack­er) to make use of nat­ur­al con­vec­tion and air cir­cu­lates from the bot­tom of the case up past the GPU, Chip­set, CPU and ram and exits via the PSU or vari­ous vents near the top of the case.

These fans are already very quiet, and with their cur­rent loc­a­tions they are away from the front of the case which is the part facing the room — this reduces the noise sig­na­ture even fur­ther. In addi­tion, when the sys­tem is under nor­mal use all 3 fans are reduced from 1000rpm to ~400rpm with Speed-FanDes­pite the excep­tion­ally low air­flow in this low-fan-speed con­fig­ur­a­tion the CPU is typ­ic­ally ~43C and the GPU  ~49C.

The sys­tem is Prime95 y Fur­Mark stable.

Encontrado esto útil? Por favor, háganos saber dejando caer un comentario más abajo. Si desea suscribirse por favor utilice el enlace de suscripción en el menú en la parte superior derecha. También puede compartir esto con tus amigos mediante el uso de los enlaces sociales inferiores. Aclamaciones.

Deja una respuesta