احتجت مؤخرًا إلى إعداد جهاز ESP32 جديد لتوسيع شبكة BLE الخاصة بمراقبة المصنع. ضربت واحدة أو 2 القضايا التي تفعل ذلك جديرة بالملاحظة
Firstly it turns out some USB to Mini-USB cables just don’t have the data wires connected at all. So if you connect the device and its power light comes on but windows doesn’t detect a new device then the cable might be useless. I checked mine with a spare kindle that we had sitting around and confirmed no data. ال 4ذ cable I found finally worked
Secondly it turns out even some cables that do support data still don’t work properly. Tips online say some makes of cable have a capacitor or something embedded somewhere. If you are using “esp-home flasher” you might get an error that looks something likeesp32 Unexpected error: could not open port 'COM10': PermissionError(13, 'Access is denied.', None, 5)
مرة أخرى, if you hit this, try a different cable!
من فضلك أرسل لنا أفكارك بالتعليق أدناه! إذا كنت ترغب في الاشتراك يرجى استخدام الرابط الاشتراك في القائمة في اعلى اليمين. يمكنك أيضا مشاركة هذا مع أصدقائك باستخدام الروابط الاجتماعية أدناه. في صحتك.
اترك رد