I recently needed to set up a new ESP32 device to extend my plant monitoring BLE network. I hit one or 2 issues doing so that were worth noting
Firstly it turns out some यूएसबी to Mini-यूएसबी cables just don’t have the data wires connected at all. So if you connect the device and its power light comes on but windows doesn’t detect a new device then the cable might be useless. I checked mine with a spare kindle that we had sitting around and confirmed no data. The 4वें cable I found finally worked
Secondly it turns out even some cables that do support data still don’t work properly. Tips online say some makes of cable have a capacitor or something embedded somewhere. If you are using “esp-home flasher” you might get an error that looks something likeesp32 Unexpected error: could not open port 'COM10': PermissionError(13, 'Access is denied.', None, 5)
फिर, if you hit this, try a different cable!
लगता है कि हम कुछ नहीं छूटा है? हमें नीचे टिप्पणी से पता करते हैं. आप सदस्यता के लिए चाहते हैं, तो ऊपर दाईं ओर मेनू पर लिंक का उपयोग करें सदस्यता लें. आप नीचे दिए गए सामाजिक लिंक का उपयोग करके अपने दोस्तों के साथ इस साझा कर सकते हैं. चियर्स.
उत्तर छोड़ दें