DIY মিডিয়া হোম লোগো

আপনার নিজের হোম থিয়েটার এবং হাই ফাই সেটআপ নকশা ও নির্মাণের জন্য চূড়ান্ত সাইট.

0নেক্সাস RealSilent 120 অরেঞ্জ ফ্যান লোগোস্থিতাবস্থা বিষয়

I’ve been having some stability issues with my HTPC সম্প্রতি. A reinstall didn’t help so I concluded it was hardware. Removing all non essentials didn’t help either so I figured it must be CPU-র, মেমরি বা Mobo সংশ্লিষ্ট. Nothing is overclocked or tweaked and its all fairly recent brand name kit. আমি পরীক্ষিত চাপ CPU-র and memory without causing either to fail, but I continued to get occasional lockups and intermittent sluggish performance.

Now because this is a htpc, it is in a smallish case with low airflow. It has 2 120mm fans but they’re controlled based on CPU-র temp and are usually off due to low CPU-র usage combined with the huge Scythe Ninja heatsink. I knew the CPU-র wasn’t overheating but thought i’d check the gpu (A passive Radeon 5450) and hdd, which is in a suspension mounting which reduces the cooling it receives.

However both hdd and gpu were barely lukewarm. In the process I happened to catch my hand on the fairly substantial chipset heatsink (labelled “গিগাবাইট” in the photo below). সেকি! I hadn’t realised that even with the substantial cooler the chipset required or expected some active cooling from the nearby CPU-র সকেট. I don’t have a fan directly on the CPU-র heatsink (as you can see below) and the airflow over the chipset clearly wasn’t sufficient. Originally I had the fans arranged blowing air out of the case, but decided to try a small rearrangementreversing them and fractionally increasing their minimum speed. Positive case pressure is generally good practice anyway, and this way air is forced past the heatsink to exit the case. This small change seems to have done the trick.
Moral of the story: some recent(ish) chipsets (উদাঃ. Intel series 4 chipsets) require reasonable airflow (or a heatsink upgrade – উদাঃ. the Thermalright HR-05 which is now on my shopping list). It may also be a good idea to upgrade the thermal goop supplied with a high quality compound. আমি সুপারিশ আইসি 7 Diamond if you can’t.
একটি চূড়ান্ত নোট – in my case the companion southbridge, with a tiny “heatsink”, (center bottom of image) was only medium-warm and clearly doesn’t require any changes.

Overheating Heatsink on P35 Gigabyte motherboard causes problems

আপনার নিজস্ব কিছু চিন্তা পেয়েছেন? নিজেকে মন্তব্য করে নিচের প্রশ্রয় দেয়! আপনি সদস্যতা করতে চান তাহলে উপরের ডানদিকের মেনু এর লিঙ্কে সাবস্ক্রাইব ব্যবহার করুন. এছাড়াও আপনি নীচের সামাজিক লিঙ্ক ব্যবহার করে আপনার বন্ধুদের সাথে ভাগ করতে পারেন. চিয়ার্স.

উত্তর দিন