0Nexus RealSilent 120 Orange Fan LogoStability issues

I’ve been having some stability issues with my HTPC recently. A reinstall didn’t help so I concluded it was hardware. Removing all non essentials didn’t help either so I figured it must be CPU, memory or mobo related. Nothing is overclocked or tweaked and its all fairly recent brand name kit. I stress tested the CPU and memory without causing either to fail, but I continued to get occasional lockups and intermittent sluggish performance.

Now because this is a htpc, it is in a smallish case with low airflow. It has 2 120mm fans but they’re controlled based on CPU temp and are usually off due to low CPU usage combined with the huge Scythe Ninja heatsink. I knew the CPU wasn’t overheating but thought i’d check the gpu (A passive Radeon 5450) and hdd, which is in a suspension mounting which reduces the cooling it receives.

However both hdd and gpu were barely lukewarm. In the process I happened to catch my hand on the fairly substantial chipset heatsink (labelled “gigabyte” in the photo below). Ouch! I hadn’t realised that even with the substantial cooler the chipset required or expected some active cooling from the nearby CPU soquete. I don’t have a fan directly on the CPU heatsink (as you can see below) and the airflow over the chipset clearly wasn’t sufficient. Originally I had the fans arranged blowing air out of the case, but decided to try a small rearrangementreversing them and fractionally increasing their minimum speed. Positive case pressure is generally good practice de qualquer forma, and this way air is forced past the heatsink to exit the case. This small change seems to have done the trick.
Moral of the story: some recent(ish) chipsets (por exemplo. Intel series 4 chipsets) require reasonable airflow (or a heatsink upgrade – por exemplo. the Thermalright HR-05 which is now on my shopping list). It may also be a good idea to upgrade the thermal goop supplied with a high quality compound. Eu recomendo IC 7 Diamond if you can’t.
Uma nota final – in my case the companion southbridge, with a tinyheatsink”, (center bottom of image) was only medium-warm and clearly doesn’t require any changes.

Overheating Heatsink on P35 Gigabyte motherboard causes problems

Acho que perdi alguma coisa? Deixe-nos saber por comentar abaixo. Se você deseja se inscrever, use o link de inscrição no menu no canto superior direito. Você também pode compartilhar isso com seus amigos usando os links sociais abaixo. Felicidades.

Deixe uma resposta