2पूर्ण 7MC कोडेक सेटअप

मैंने पहले 7mc पर कोडेक समस्याओं के बारे में कई बार पोस्ट किया है, लेकिन मुझे लगता है कि व्यापक है कि एक हल मिल गया है अब किया है, काफी सरल और लगातार काम करता है। कुछ मुफ्त कोडेक्स और उपयोगिताओं के साथ आपके पास पूर्ण डिकोडिंग समर्थन हो सकता है, DXVA, 64 बिट में काम कर रहे उपशीर्षक और शानदार लचीलापन (या 32bit) मीडिया सेंटर। निम्नलिखित निर्देश x64 संस्करण के लिए विशिष्ट हैं, लेकिन 32 बिट संस्करण पर बस के रूप में अच्छी तरह से काम करना चाहिए.
1. Down­load and install ffdshow

• डाउन लोड ffd­show 32bit
• डाउन लोड ffd­show 64bit
• Install both

2. Con­fig­ure ffd­show settings

• Tweak any ffd­show set­tings you want — remem­ber to do it for both x32 and x64 ver­sions — e.g. I use the “mix­er” to out­put ste­reo music to my sub­woof­er as well as the main speak­ers. I also enable lots of addi­tion­al codecs in the video configuration
• खुली DXVA Video decoder configuration
• Click on hard­ware accel­er­a­tion in the menu on the left
• Tick H264 and VC1
• Set “post pro­cessing” to “Sur­face overlay”
• Click on sub­titles in the menu on the left
• Tick the box at the top
• Repeat for the x64 DXVA Video decoder configuration

3. Now dis­able the in-built Microsoft Medi­aFound­a­tion codecs (नोट: यह does­n’t break live टीवी) and replace them with ffdshow

• down­load the win7dsfiltertweaker
• Run the fil­ter tweaker
• on the first page, select ffd­show (DXVA) where pos­sible, and plain ffd­show for all oth­ers where pos­sible, for both 32bit and 64bit.
• Click apply and ok any warnings
• on the next page tick all the boxes to dis­able MF and click apply
• पर 3^rd page tick the bot­tom 2 बक्से (dis­able MF and dis­able MF 64bit) और लागू करें क्लिक.
• OK the exit
• ओपन regedit और करने के लिए ब्राउज़ करें [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionMedia CenterDecoder]
• Delete any entries that are present

4. Now install the required splitters

• डाउन लोड Haali Media splitter
• Down­load the एमपीसी-HC stan­dalone codecs in both x64 and x32
• Install Haali and enable एमपीईजी-टीएस
• निकाले एमपीसी-HC कोडेक्स
• On x64 sys­tems copy the x64 split­ter files to system32 and the x32 files to the syswow64 folder. on x32 sys­tems just copy the x32 files to system32.
• The split­ter files to copy are as fol­lows: AviSplitter.ax, FLVS­plit­ter, MatroskaS­plit­ter, MP4Splitter, MpegSplitter.
• There are oth­er split­ter files which you can also copy and register (see below) but I haven’t needed them
• Register the split­ter files as fol­lows: open an elev­ated com­mand prompt, for each file you copied run the com­mand “regsvr32 file­name”. If you are on x64 win­dows change dir­ect­ory from system32 to syswow64 and repeat the registering

5. Use registry tweaks to use the एमपीसी-HC split­ter for most files and Haali for .mkv and .m2t files

• ओपन regedit और करने के लिए ब्राउज़ करें [HKEY_CLASSES_ROOTMedia TypeExtensions]
• Check that their are keys for .m2ts, .टीएस, .mp4, .MKV, .m2t and cre­ate any new keys that are required
• Inside each key check that their is a string with the name “Source Filter”
• Set the value of source fil­ter for .m2ts, .ts and .mp4 to {1365BE7A-C86A-473C-9A41-C0A6E82C9FA3}
• Set the value of source fil­ter for .mkv and .m2t to {55DA30FC-F16B-49FC-BAA5-AE59FC65F82D}

6. Enable ogg and flac audio

• Down­load the xiph ogg­co­decs for both x32 and x64
• Install both
• डाउन लोड WMPTag प्लस — oth­er tag extenders don’t seem to work so well
• Dis­able the x64 Media Play­er by renam­ing the folder “Win­dows Media Play­er” inside the Pro­gram Files folder (on x64 win­dows only!) and then cre­ate a new “Win­dows Media Play­er” folder. copy the con­tents of the “Win­dows Media Play­er” folder from the “Pro­gram Files (x 86)” to your new folder. This forces Media Cen­ter to use the Media Play­er 32bit engine for music — which sup­ports the tag extender. Once a 64bit tag extender is avail­able this will no longer be necessary

7. Reboot and you’re good to go.
Any .m2ts files that don’t play back prop­erly rename the exten­sion to .m2t (which as far as win­dows is con­cerned is the same).  This will change the split­ter used and should resolve any play­back problems.