DIY मीडिया होम लोगो

अपनी खुद की होम थिएटर और हाय-Fi सेटअप डिजाइन और बनाने के लिए परम साइट.

0डीवीबी तर्कनिश्चित: DVBLink मीडिया सेंटर playready संदेश

मैं साझा करने के लिए DVBLink उपयोग किया गया है टीवी कई वर्षों के लिए अपने घर के आसपास. इसके साथ सभी मुद्दों का, the most dreaded is thePlay Readyerror on Windows Media Center clients. The problem is this error message is meaninglessit is generated by Media Center, और सिर्फ यह ट्यूनर से एक संकेत नहीं मिल सकते हैं इसका मतलब. विफलता पर्दे के पीछे कहीं भी हो सकता है. हाल ही में मेरे 2 मुख्य ग्राहकों को पूरी तरह से नीले रंग से बाहर इस त्रुटि को फेंकना शुरू कर दिया.

Other clients worked fine and the problem clients could access टीवी through the web interface. Following these results I felt confident that there was nothing wrong on the server end and turned to the clients for the source of the problem.
I inspected error logs on the server, which didn’t show any connection even being attempted, और इसलिए कोई त्रुटियों से पता चला. After considerable digging I located the client error logs, but these were also unhelpful. I tried all the obvious thingswiping and re-setting up the टीवी tuners in Media Center, reinstalling the DVBLink client, checking network connections, firewalls, आदि, but nothing worked.
Eventually, resorting tolet’s just try stupid stuff that shouldn’t make any senseI tried copying over the entire DVBLink folder from “कार्यक्रम फ़ाइलें” on a working PC to one of the 2 failed clients. To my surprise this solved the problem!
Not being satisfied with this inexplicable solution I checked the sizes and modified dates for all the files on the fixed client, and the one still not working client. वे सब एक ही थे! Determined to narrow the problem down I copied files, 1 एक समय में, from the non-working client, onto the working client. Eventually, one filere-brokethe fixed client. The file was the configuration filedvblink_configuration.xml
मैं जाँच 2 एक दूसरे के खिलाफ फ़ाइलें. Both had the same modified date, और दोनों बिल्कुल थे 906 बाइट्स. I opened the working file in textpad and found a bunch or sensible settings, and figured that somehow one of them had got changed without the file size or date changing. I opened the non-working settings file to compare settings in an attempt to identify the fault. गैर काम फ़ाइल रिक्त था! It seems that despite being the right size and date, somehow the file had become corrupt and wiped. Reinstalling the DVBLink client had failed to fix it (it hadn’t been removed and reinstalled, और न ही यह ओवर में लिखा गया था. Using the DVBLink settings start menu entry also had failed to fix the file.
I scanned the disk but found no other corruption. मेरा सबसे अच्छा लगता पीसी rebooted है कि, दुर्घटनाग्रस्त हो गया, or lost power for some reason whilst something was reading the file. Unfortunately nothing (विंडोज़, या DVBLink) notified me about any file corruption, which made diagnosis very tricky.
भविष्य में, when reinstalling DVBLink I will always wipe the installation folder manually after uninstallationI can recommend others do the same!

हम कुछ याद है सोचो? हम नीचे टिप्पणी से पता लगाते हैं. आप सदस्यता के लिए चाहते हैं, तो ऊपर दाईं ओर मेनू पर लिंक का उपयोग करें सदस्यता लें. आप नीचे दिए गए सामाजिक लिंक का उपयोग करके अपने दोस्तों के साथ इस साझा कर सकते हैं. चियर्स.

उत्तर छोड़ दें