0XBee ZigBeeリピーターのセットアップ

私のスマートホームの段階的拡大の一環として (ロックダウン中に何かをするかもしれません?) SmartTh­ingsハブの到達範囲を改善するためにXBeeをセットアップすることにしました. 初心者向けの良い情報は少し見当違いですので、まずは基本的なまとめをまとめてみようと思いました。.

Useful sources of information

Why an XBee

I needed a Zig­Bee repeat­er. I have sev­er­al Xiaomi Zig­Bee devices which don’t work well with most repeat­ers due to them not quite fol­low­ing the stand­ards corectly. They do work with the Ikea Trad­fri plugs which only cost £10 (kudos to Ikea!) so if you just need a cheap repeat­er then a Trad­fri plug is a good way to do it. I have one and can con­firm it works well with Xiaomi kit. 但し, I wanted a stronger repeat­er, and I also wanted to be able to see and mon­it­or my Zig­Bee mesh — both things that the XBee can do. The final reas­on in my case was that I don’t want to click-and-col­lect from Ikea dur­ing lock­down but noth­ing was avail­able for deliv­ery soon­er than 30 日々, where­as the parts for an XBee were avail­able next day!

The kit you need…

You need an XBee board
You need a USB adapter to power (and pro­gram) the XBee
You need a USB cable to con­nect the adapter (the adapter should come with one)
You prob­ably want a case to keep the whole lot in

I got all of the above in 2 simple pur­chases for a com­bined total of £31.35…
I got the XB24CZ7WIT-004 Zig­Bee Mod­ule itself from RSCom­pon­ents in the 英国 for £18.36 (inc VAT and free deliv­ery). This came next day in a neat little plastic box which is per­fect for keep­ing the whole setup in.
I got the USB adapter with cable from Amazon 英国 for £12.99

to be con­tin­ued…

下記のコメントで私達にあなたの考えを送ってください! あなたが購読したい場合は、右上のメニューで購読リンクをご利用ください. また、下記の社会的なリンクを使用してお友達とこれを共有することができます. 乾杯.

返信を残します