0मौन उच्च प्रदर्शन पीसी

बस मैं कैसे ठंडा सुधार हुआ है और बस मामले प्रशंसकों को ले जाकर अपने मुख्य पीसी में शोर को कम कर दिया के विवरण के साथ एक त्वरित पोस्ट ...

The सीपीयू is a Pen­ti­um Dual Core E6300, offi­cially a 2.80GHz part. I’m run­ning it at 3.20GHz with a 400MHz bus. The GPU is an ATi Radeon HD4850 with a slight over­clock (650MHz core, 1000MHz राम).  Everything is run­ning on nor­mal voltages, and all power sav­ing fea­tures are enabled, so when the sys­tem is idle the सीपीयू clocks down to 2.40GHz and the GPU core clocks down to 500MHz.

Both are tech­nic­ally fan­less and rely on the air­flow provided by the 3 case fans — Nex­us Real Silent 120mm fans, 2 of which are intake and 1 of which is in the पीएसयू.  I have used the vent hole in the bot­tom of the case (An ori­gin­al Cool­er­Mas­ter Stack­er) to make use of nat­ur­al con­vec­tion and air cir­cu­lates from the bot­tom of the case up past the GPU, Chip­set, सीपीयू and ram and exits via the पीएसयू or vari­ous vents near the top of the case.

These fans are already very quiet, and with their cur­rent loc­a­tions they are away from the front of the case which is the part facing the room — this reduces the noise sig­na­ture even fur­ther. In addi­tion, when the sys­tem is under nor­mal use all 3 fans are reduced from 1000rpm to ~400rpm with स्पीड फैन.  Des­pite the excep­tion­ally low air­flow in this low-fan-speed con­fig­ur­a­tion the सीपीयू is typ­ic­ally ~43C and the GPU  ~49C.

The sys­tem is Prime95 तथा Fur­Mark stable.