DIY मीडिया होम लोगो

अपनी खुद की होम थिएटर और हाय-Fi सेटअप डिजाइन और बनाने के लिए परम साइट.

4नींद और इंटेल 82567LM -3 साथ WOL

I have a couple of old USFF Dell Opti­plex 760 पीसी that have a built-in Intel 82567LM‑3 gig­abit eth­er­net con­nec­tion. Get­ting this adapter to work with both Sleep (S3 Sus­pend to राम) और साल (लैन में चालू होना) बहुत मुश्किल साबित हो गया है. The PC ori­gin­ally came with Win­dows Vista and as a busi­ness class PC you’d expect these 2 fea­tures to work but it has always been a battle to get them working.

विंडोज़ 7

Back in the days of Win­dows 7 I did even­tu­ally get both पीसी work­ing with Sleep and WOL. Doing so required a lot of fid­dling about with drivers and set­tings so I will detail all the set­tings that worked for Win­dows 7 below.

  • युक्ति: Intel 82567LM‑3
  • इंटेल PROSet 22.9.6.0
  • चालक 12.10.12.0
  • Driver Pro­vider: इंटेल
  • ड्राइवर दिनांक: 18/07/2013
  • पावर सेव विकल्प: सब 3 unticked
  • लैन विकल्प पर जागो: both ‘Wake on Magic Pack­et’ ticked and ‘Wake on Pat­tern Match’ unticked

This driver can be down­loaded from soft­pe­dia. ड्राइवर फ़ाइलों PRO1000 Winx64 NDIS62 सबफ़ोल्डर में पाए जाते हैं

Some sites also sug­gest that Intel ME needs to have the cor­rect set­tings in firm­ware. This is accessed by Press Ctrl‑P at bootup. I checked my set­tings and they are as follows…

  • Intel ME Con­fig­ur­a­tion: State Con­trol: सक्रिय
  • Intel ME Con­fig­ur­a­tion: Man­age­ab­il­ity Fea­ture Selec­tion: Intel Stand­ard Manageability
  • Intel ME Con­fig­ur­a­tion: Intel ME Power Con­trol: होस्ट नींद राज्य अमेरिका में इंटेल मुझ पर: डेस्कटॉप पर
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: SOL/IDE‑r: सक्रिय
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: Cur­rent Pro­vi­sion­ing Mode: PKI
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: होस्ट नाम: YOUR-पीसी NAME-यहाँ
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: टीसीपी / आईपी: डीएचसीपी सक्षम: और

Once your ME set­tings are cor­rect, आप ड्राइवर है स्थापित ऊपर, and you have your win­dows set­tings cor­rect you should be able to use WOL from sleep when run­ning Win­dows 7.

विंडोज़ 10

Unfor­tu­nately the driver used for Win­dows 7 does­n’t want to be com­pat­ible with Win­dows 10 and so far I haven’t found an altern­at­ive that is offi­cially com­pat­ible. वहाँ पर एक अच्छा धागा है Intel for­ums that cov­ers the same issue and the poster there has been pretty thorough.

Like the poster on the Intel for­ums I tried for­cing a dif­fer­ent driver onto Win­dows 10 and suc­ceeded in for­cing a driver for the i218-LM card which does at least work. How­ever this still did­n’t get WOL working.

चालक हैकिंग

To see if there is any way to get the Win­dows 7 driver work­ing with Win­dows 10 I set about hack­ing the inf file. I did man­age to hack it and get it to install although annoy­ingly this did mean I had to turn off driver sign­ing tem­por­ar­ily. I have detailed the pro­cess I used below.

Turn off driver sign­ing (देखना जीत Dows 10 ट्रिक्स अधिक तरीकों के लिए)

  • प्रारंभ क्लिक करें, expand the arrow next to shut­down, shift कुंजी दबाए रखें और पुन: प्रारंभ क्लिक करें
  • Select troubleshoot­ing
  • का चयन करें उन्नत
  • रिबूट करें
  • At the menu that appears after reboot­ing press the 7 key to dis­able driver signing

फ़ाइल e1k62x64.inf संपादित करें

  • Delete line 98
  • बदलें
    %इंटेल इंटेल% =, NTamd64.6.1, NTamd64.6.1.1, NTamd64.6.2
    
    [ControlFlags]
    ExcludeFromSelect = \ 
        पीसीआई\VEN_8086&DEV_10DE&SUBSYS_10DE8086,  
        पीसीआई\VEN_8086&DEV_10DF&SUBSYS_10DF8086

    तक

    %इंटेल इंटेल% =, NTamd64.6.1, NTamd64.6.1.1
    
    [ControlFlags]
    ExcludeFromSelect = \ 
        पीसीआई\VEN_8086&DEV_153A,\ 
        पीसीआई\VEN_8086&DEV_153B

Use device man­ager to do a “have disk” forced driver install­a­tion. Then change the same set­tings as spe­cified for win­dows 7 ऊपर. This worked to install the driver that matches the one installed on Win­dows 7, but WOL still did­n’t work!

Next I need to check each of the ME set­tings and the Intel driver set­tings against each oth­er 1 by 1 in the hope that the dis­crep­ancy is some­where in the set­tings. I do remem­ber hav­ing an issue with Win­dows 7 where I had to find some obscure set­ting to get it work­ing. I am for­tu­nate to have 2 identic­al पीसी, जीत के साथ एक 7 और विन के साथ एक 10. I will con­tin­ue to see if I can find a solu­tion and will update this post with any­thing I find.

I also noticed that a small num­ber of set­tings seemed to show on the win 10 machine that wer­en’t present on the win 7 मशीन. I need to check my driver hack and also remote any pre­vi­ous Intel ProSet that has been installed to try to clear this. I plan to remove proset via pro­grams and fea­tures, और यह भी हटाने और ड्राइवरों को हटाना. I will then rein­stall the drivers and then run the proset installer (मैं यह देखने के लिए ड्राइवर की जीत में स्थापित किया गया था की जाँच करेगा 7 — was it driver only or full proset)

Leave a Reply

4 Comments

AMDMan64

I just got this work­ing on an HP dc7900 with an 82567LM‑3 adapter on Win 10 Pro 1909.
With the inbox Win­dows 10 ड्राइवर, it would­n’t work and I sus­pect it’s because that driver does­n’t sup­port the PME set­ting. If it does, maybe it isn’t exposed.
I down­loaded the 22_10 Proset from here:
https://downloadcenter.intel.com/download/27495/Intel-Ethernet-Adapter-Complete-Driver-Pack
Then, extract it.
Select your NIC and do the Have Disk meth­od. Point it to PRO1000\Winx64\NDIS65.
Select the 82579LM Gig­abit Net­work Con­nec­tion. Con­tin­ue through the prompt about it being poten­tially incompatible.
Make sure your net­work is still work­ing — it works on this sys­tem. Driver is dated 7/25/2016 - 12.15.31.4
Under Advanced — make sure that Enable PME is con­figured and both Wake on Magic Pack­et and Wake on Pat­tern Match are enabled.
I have also dis­abled Fast Star­tup to make sure that the sys­tem shuts down to S5 instead of Hybrid.
I’m not sure if this is required, but HP said to set the fol­low­ing key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NDIS\Parameters
DWORD — AllowWakeFromS5
Value 1
I hope this helps someone out there.

जवाब दें
जेएसJon Scaife

अपने कॉम के बयान के लिए धन्यवाद, this looks excep­tion­ally use­ful. I have replaced one of my Dell पीसी since I wrote this, but I will be upgrad­ing the oth­er to win­dows 10 dur­ing the Cov­id lock­down and I will be test­ing this on it. एक बार फिर धन्यवाद!

जवाब दें
एफफ्लोरिडा

So far i only man­aged to allow WOL from shut­down and hibern­ate in win10 in dell opti­plex 760, प्रॉसेट का उपयोग करना 25 and win­dows driver from microsoft update cata­log but not from sleep S3. My work­around is to enable ME and use AMT to wake the machine from sleep.

जवाब दें
Hएचएनकेवी

Thanks AMD­Man
I tried your work­around on two Hew­lett-Pack­ard HP Com­paq 8000 élite desktop PC’s and it works fine.
WOL in Windows10 Pro!
Be sure dis­abled Fast Star­tup oth­er­wise it won’t work.

जवाब दें