DIY Главная Медиа Logo

Конечная сайт для проектирования и создания вашей установке домашнего кинотеатра и Привет-Fi.

3Сон и WOL с Intel 82567LM-3

У меня есть несколько старых USFF Dell OptiPlex 760 ПК которые имеют встроенный 82567LM-3 соединения локальных сетей гигабита Intel. Получение этого адаптера для работы с обоими Sleep (S3 Suspend к ОЗУ) и SAL (Wake On LAN) оказалось очень сложно. PC изначально пришли с Windows Vista и в качестве бизнес-класса PC вы ожидали бы эти 2 особенности в работе, но она всегда была борьба, чтобы заставить их работать.

Окна 7

Back in the days of Win­dows 7 I did even­tu­ally get both ПК work­ing with Sleep and WOL. Doing so required a lot of fid­dling about with drivers and set­tings so I will detail all the set­tings that worked for Win­dows 7 ниже.

  • устройство: Intel 82567LM‑3
  • Intel ProSet 22.9.6.0
  • Водитель 12.10.12.0
  • Driver Pro­vider: Intel
  • Дата драйвера: 18/07/2013
  • Параметры сохранения питания: Все 3 неотмеченным
  • Услуга по вариантам LAN: both ‘Wake on Magic Pack­et’ ticked and ‘Wake on Pat­tern Match’ unticked

This driver can be down­loaded from soft­pe­dia. The driver files are found in the PRO1000\Winx64\NDIS62 sub­folder

Some sites also sug­gest that Intel ME needs to have the cor­rect set­tings in firm­ware. This is accessed by Press Ctrl‑P at bootup. I checked my set­tings and they are as fol­lows…

  • Intel ME Con­fig­ur­a­tion: State Con­trol: Включено
  • Intel ME Con­fig­ur­a­tion: Man­age­ab­il­ity Fea­ture Selec­tion: Intel Stand­ard Man­age­ab­il­ity
  • Intel ME Con­fig­ur­a­tion: Intel ME Power Con­trol: Intel ME ON в хост Сна: Desktop ON
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: SOL/IDE‑r: Включено
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: Cur­rent Pro­vi­sion­ing Mode: ИПК
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: Имя хоста: YOUR-PC-NAME-ЗДЕСЬ
  • Intel Stand­ard Man­age­ab­il­ity Con­fig­ur­a­tion: TCP / IP: DHCP Enabled: и

Once your ME set­tings are cor­rect, у вас есть драйвер выше установлен, and you have your win­dows set­tings cor­rect you should be able to use WOL from sleep when run­ning Win­dows 7.

Окна 10

Unfor­tu­nately the driver used for Win­dows 7 does­n’t want to be com­pat­ible with Win­dows 10 and so far I haven’t found an altern­at­ive that is offi­cially com­pat­ible. Существует хороший поток на Intel for­ums that cov­ers the same issue and the poster there has been pretty thor­ough.

Like the poster on the Intel for­ums I tried for­cing a dif­fer­ent driver onto Win­dows 10 and suc­ceeded in for­cing a driver for the i218-LM card which does at least work. How­ever this still did­n’t get WOL work­ing.

Взлом драйвер

To see if there is any way to get the Win­dows 7 driver work­ing with Win­dows 10 I set about hack­ing the inf file. I did man­age to hack it and get it to install although annoy­ingly this did mean I had to turn off driver sign­ing tem­por­ar­ily. I have detailed the pro­cess I used below.

Turn off driver sign­ing (посмотреть Окнах 10 Трюки for more meth­ods)

  • Нажмите кнопку Пуск, expand the arrow next to shut­down, удерживайте клавишу переключения и нажмите рестарт
  • Select troubleshoot­ing
  • Выберите расширенный
  • Выбор перезагрузки
  • At the menu that appears after reboot­ing press the 7 key to dis­able driver sign­ing

Отредактируйте файл e1k62x64.inf

  • Удаление строки 98
  • Изменение
    %Intel Intel% =, NTamd64.6.1, NTamd64.6.1.1, NTamd64.6.2
    
    [ControlFlags]
    ExcludeFromSelect = \ 
        PCI\VEN_8086&DEV_10DE&SUBSYS_10DE8086,  
        PCI\VEN_8086&DEV_10DF&SUBSYS_10DF8086

    в

    %Intel Intel% =, NTamd64.6.1, NTamd64.6.1.1
    
    [ControlFlags]
    ExcludeFromSelect = \ 
        PCI\VEN_8086&DEV_153A,\ 
        PCI\VEN_8086&DEV_153B

Use device man­ager to do a “have disk” forced driver install­a­tion. Then change the same set­tings as spe­cified for win­dows 7 над. This worked to install the driver that matches the one installed on Win­dows 7, but WOL still did­n’t work!

Next I need to check each of the ME set­tings and the Intel driver set­tings against each oth­er 1 от 1 in the hope that the dis­crep­ancy is some­where in the set­tings. I do remem­ber hav­ing an issue with Win­dows 7 where I had to find some obscure set­ting to get it work­ing. I am for­tu­nate to have 2 identic­al ПК, один с Win 7 и один с Win 10. I will con­tin­ue to see if I can find a solu­tion and will update this post with any­thing I find.

I also noticed that a small num­ber of set­tings seemed to show on the win 10 machine that wer­en’t present on the win 7 машина. I need to check my driver hack and also remote any pre­vi­ous Intel ProSet that has been installed to try to clear this. I plan to remove proset via pro­grams and fea­tures, а также удалить и удалить драйверы. I will then rein­stall the drivers and then run the proset installer (я буду проверять, чтобы увидеть, как водитель был установлен в выигрыше 7 — was it driver only or full proset)

Нашел это полезно? Пожалуйста, дайте нам знать, понижая комментарий ниже. Если вы хотите подписаться, пожалуйста, используйте ссылку подписаться на меню в верхнем правом углу. Вы также можете поделиться этим со своими друзьями с помощью социальных связей ниже. ура.

оставьте ответ

3 Комментарии

GravatarAMDMan64

I just got this work­ing on an HP dc7900 with an 82567LM‑3 adapter on Win 10 За 1909.
With the inbox Win­dows 10 водитель, it would­n’t work and I sus­pect it’s because that driver does­n’t sup­port the PME set­ting. If it does, maybe it isn’t exposed.
I down­loaded the 22_10 Proset from here:
https://downloadcenter.intel.com/download/27495/Intel-Ethernet-Adapter-Complete-Driver-Pack
Затем, extract it.
Select your NIC and do the Have Disk meth­od. Point it to PRO1000\Winx64\NDIS65.
Select the 82579LM Gig­abit Net­work Con­nec­tion. Con­tin­ue through the prompt about it being poten­tially incom­pat­ible.
Make sure your net­work is still work­ing — it works on this sys­tem. Driver is dated 7/25/2016 12.15.31.4
Under Advanced — make sure that Enable PME is con­figured and both Wake on Magic Pack­et and Wake on Pat­tern Match are enabled.
I have also dis­abled Fast Star­tup to make sure that the sys­tem shuts down to S5 instead of Hybrid.
I’m not sure if this is required, but HP said to set the fol­low­ing key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NDIS\Parameters
DWORD — AllowWakeFromS5
Ценность 1
I hope this helps someone out there.

Ответить
GravatarДжон Скайф

Спасибо за ваш ком-ния, this looks excep­tion­ally use­ful. I have replaced one of my Dell ПК since I wrote this, but I will be upgrad­ing the oth­er to win­dows 10 dur­ing the Cov­id lock­down and I will be test­ing this on it. Еще раз спасибо!

Ответить
GravatarФлорида

So far i only man­aged to allow WOL from shut­down and hibern­ate in win10 in dell opti­plex 760, с помощью PROSet 25 and win­dows driver from microsoft update cata­log but not from sleep S3. My work­around is to enable ME and use AMT to wake the machine from sleep.

Ответить