4Humax PVR-9200TCopie los archivos de Humax PVR 9200T al PC

Soy dueño de un par de Humax PVR 9200T PVT-dual TDT, ambos de los cuales son ahora bastante completo con programas grabados. Humax han proporcionado un programa llamado eLinker, pero no es muy bueno Una buena alternativa es Humax Media Controller pero desafortunadamente no funciona con Windows x64, como Mike Dimmick explica. agradecidamente, Mike también ha creado una solución parcheando algunos de los archivos, de manera que controlador de medios Humax ahora puede ser utilizado con éxito en Windows 7 x64. El único problema es que Windows debe iniciarse con Driver Signing Enforcement deshabilitado.

Encontrado esto útil? Por favor, háganos saber dejando caer un comentario más abajo. Si desea suscribirse por favor utilice el enlace de suscripción en el menú en la parte superior derecha. También puede compartir esto con tus amigos mediante el uso de los enlaces sociales inferiores. Aclamaciones.

Deja una respuesta

4 comentarios

gravatarroger

I’m try­ing to loc­ate a copy of the soft­ware mike cre­ated to sup­port Win­dows x64 (HumaxPVR.zip).…the down­load link on his Blog­ger page is no longer func­tion­al …it is a very old piece of soft­ware now.
Should any­one be able to point me in the dir­ec­tion of a copy, I’d appre­ci­ate it.

Respuesta
gravatarroger

Jon, gracias por los archivos.
Unfor­tu­nately I don’t seem to be able to get the cor­rect driver to install.
I’m bypassing the unsigned driver pro­tec­tion and am offered HumaxSTBAlternate.inf as the driver installer .…but the driver installed by this is described as writ­ten by ‘Humax STB’ ver­sion 0.1.12.1 20/3/2007
I get a device con­nec­tion error on run­ning Humax.bat

Respuesta
gravatarJon Scaife

Hi Roger
That is frus­trat­ing. I assume you’re on win­dows 10 o 11? This was from the Win­dows 7 days so that might be the issue. It sounds like the cor­rect driver is installing — the inf file was cre­ated by Humax and mod­i­fied by Mike D but still shows as ver­sion 0.1.12.1 as you say.
I assume you’ve con­nec­ted the humax to the com­puter with a USB cable and then installed the driver for the “unknown device” or whatever the humax shows up as?
There are instruc­tions here for how to use the drivers — http://www.enigma.eclipse.co.uk/humax/HumaxMediaController.htm
Make sure you’ve rebooted with driver sign­ing enforce­ment turned off first (which is quite faffy on win 10 i believe) — tips on how to do that here — https://answers.microsoft.com/en-us/windows/forum/all/permanent-disable-driver-signature-verification/009c3498-bef8-4564-bb52-1d05812506e0

Respuesta