4Humax PVR-9200TCopiate i file dal Humax PVR 9200T al PC

Possiedo un paio di Humax PVT-9200T PVR dual Freeview, entrambi i quali sono ora abbastanza pieno con programmi registrati. Humax hanno fornito un programma chiamato eLinker, ma non è molto buono. Una buona alternativa è Humax Media Controller ma sfortunatamente non funziona con Windows x64, come Mike Dimmick spiega. Per fortuna, Mike ha anche creato una soluzione per patch alcuni dei file, in modo che Humax Media Controller può ora essere utilizzato con successo in Windows 7 x64. L'unico problema è che Windows deve essere avviato con l'applicazione della firma del driver disabilitata.

Ho trovato questo utile? Per favore fateci sapere facendo cadere un commento qui sotto. Se si desidera iscriversi si prega di utilizzare il link iscriviti sul menu in alto a destra. È inoltre possibile condividere con i tuoi amici usando i link sottostanti sociali. Saluti.

lascia un commento

4 Commenti

gravatarRuggero

I’m try­ing to loc­ate a copy of the soft­ware mike cre­ated to sup­port Win­dows x64 (HumaxPVR.zip).…the down­load link on his Blog­ger page is no longer func­tion­al …it is a very old piece of soft­ware now.
Should any­one be able to point me in the dir­ec­tion of a copy, I’d appre­ci­ate it.

rispondere
gravatarRuggero

Jon, Grazie per i file.
Unfor­tu­nately I don’t seem to be able to get the cor­rect driver to install.
I’m bypassing the unsigned driver pro­tec­tion and am offered HumaxSTBAlternate.inf as the driver installer .…but the driver installed by this is described as writ­ten by ‘Humax STB’ ver­sion 0.1.12.1 20/3/2007
I get a device con­nec­tion error on run­ning Humax.bat

rispondere
gravatarJon Scaife

Hi Roger
That is frus­trat­ing. I assume you’re on win­dows 10 o 11? This was from the Win­dows 7 days so that might be the issue. It sounds like the cor­rect driver is installing — the inf file was cre­ated by Humax and mod­i­fied by Mike D but still shows as ver­sion 0.1.12.1 as you say.
I assume you’ve con­nec­ted the humax to the com­puter with a USB cable and then installed the driver for the “unknown device” or whatever the humax shows up as?
There are instruc­tions here for how to use the drivers — http://www.enigma.eclipse.co.uk/humax/HumaxMediaController.htm
Make sure you’ve rebooted with driver sign­ing enforce­ment turned off first (which is quite faffy on win 10 i believe) — tips on how to do that here — https://answers.microsoft.com/en-us/windows/forum/all/permanent-disable-driver-signature-verification/009c3498-bef8-4564-bb52-1d05812506e0

rispondere