4数码士PVR-9200T从数码士PVR 9200T的文件复制到电脑

发表 经过 & 归档于 Freeview频道, 其它媒体软件. 最近更新时间 .

我自己的几个数码士PVT-9200T双Freeview频道的个人录像机, 这两者都是现在很满录制的节目。 Humax公司提供了一个名为eLinker程序, 但这不是很好。一个不错的选择是 Humax 媒体控制器，但不幸的是它不适用于 Windows x64, 如 迈克Dimmick 解释。感激地, 迈克已经通过修补一些文件也创造了一个解决方案, 让数码士媒体控制器现在可以成功地在Windows中使用 7 x64。唯一的问题是 Windows 必须在禁用驱动程序签名强制的情况下启动.

你怎么看? 请给我们一个评论如下! 如果您想订阅，请使用菜单上的订阅链接右上方. 您还可以通过使用下面的链接社会分享这与你的朋友. 干杯.

发表评论

4 条评论

的gravatar罗杰

I’m try­ing to loc­ate a copy of the soft­ware mike cre­ated to sup­port Win­dows x64 (HumaxPVR.zip).…the down­load link on his Blog­ger page is no longer func­tion­al …it is a very old piece of soft­ware now.
Should any­one be able to point me in the dir­ec­tion of a copy, I’d appre­ci­ate it.

回复
的gravatar罗杰

乔恩, 感谢您的文件.
Unfor­tu­nately I don’t seem to be able to get the cor­rect driver to install.
I’m bypassing the unsigned driver pro­tec­tion and am offered HumaxSTBAlternate.inf as the driver installer .…but the driver installed by this is described as writ­ten by ‘Humax STB’ ver­sion 0.1.12.1 20/3/2007
I get a device con­nec­tion error on run­ning Humax.bat

回复
的gravatar乔恩·斯凯夫

Hi Roger
That is frus­trat­ing. I assume you’re on win­dows 10 或者 11? This was from the Win­dows 7 days so that might be the issue. It sounds like the cor­rect driver is installing — the inf file was cre­ated by Humax and mod­i­fied by Mike D but still shows as ver­sion 0.1.12.1 as you say.
I assume you’ve con­nec­ted the humax to the com­puter with a USB cable and then installed the driver for the “unknown device” or whatever the humax shows up as?
There are instruc­tions here for how to use the drivers — http://www.enigma.eclipse.co.uk/humax/HumaxMediaController.htm
Make sure you’ve rebooted with driver sign­ing enforce­ment turned off first (which is quite faffy on win 10 i believe) — tips on how to do that here — https://answers.microsoft.com/en-us/windows/forum/all/permanent-disable-driver-signature-verification/009c3498-bef8-4564-bb52-1d05812506e0

回复