Articles par : Jon Scaife

0MCEBuddy LogoMCEBuddy — v2 Bêta 14

MCE-Buddy 2 Bêta 14 est sorti. Il est la première version depuis longtemps qui est un programme complet. Il comprend également un soutien officiel x64. Il y a encore quelques grandes questions en suspens, mais dans ces limites, il devrait être une excellente solution pour convertir les fichiers WTV et décapage annonces d'eux.

0Dell 3130cn LogoExcellent utility to fix Epson printers

I had a prob­lem with an old Epson Stylus Photo R200 print­er. Des­pite being loaded with paper and fresh genu­ine ink cart­ridges, the unit refused to print. The 2 red warn­ing lights on top were flash­ing altern­ately. After con­sid­er­able googling I dis­covered that this error code is related to the ink cart­ridge clean­ing well. Appar­ently it gets full of ink after a cer­tain num­ber of head clean­ing cycles. As usu­al with cheap inkjet print­ers, the warn­ing is based on a counter, not on the actu­al full­ness of the clean­ing well, and the error can be bypassed by reset­ting the counter in the print­er. The good news is there is a util­ity which will do just that. Although it does­n’t list sup­port, I can con­firm that the util­ity does work fine on Win­dows 7 x64, so I believe it should work on every ver­sion of win­dows since Win­dows 95!

0Antec Fusion HTPC Case à distance LogoComparaison des HTPC GPU

Anandtech a une excellente article comparant 4 extrémité inférieure GPU« S pour HTPC'S.  L'article est vaste et fait un bon travail d'expliquer les questions de calendrier framerate, détection de cadence, téléciné et pulldown ainsi que de comparer la 4 GPU« S. Comme nous ne croyons pas à réinventer la roue - nous recommandons un bâtiment tout le monde HTPC setup lire l'article avant de partir.

0AMD Vision Fusion Prime LogoFusion E-450 à venir

Semi-Ac-cur-mangé has news that AMD are to immin­ently release a new Zacate mem­ber of the Brazos plat­form. Accord­ing to pre­vi­ous inform­a­tion on Anandtech et Hex­us the E‑450 is clocked at 1.65GHz (up from 1.60GHz) and has graph­ics clocked at 600MHz (up from 500MHz).  It will also reportedly sup­port high­er speeds of DDR3 memory, and fea­ture some kind of turbo.

0FFmpeg Logoffdshow DXVA fixé

DXVA dans ffdshow, qui était [int­link id=“937” type=“post”]rompu pour les quelques derniers construit[/intlink], semble avoir été fixé, au moins dans l' 3878 x64 construire à partir de 11th juin.

0PSU Logoefficacité PSU 4 - jeu moderne PC

This art­icle on PSU effi­ciency for a mod­ern sandy bridge gam­ing PC fol­lows on from 3 pre­vi­ous art­icles, sur PSU effi­ciency for a medi­um power serv­er, une medi­um use very high power gam­ing PC et un low power serv­er or HTPC.
Lire l'article complet

0PSU Logoefficacité PSU: vaut la mise à niveau? partie 3

This is the third install­ment in a series of art­icles address­ing PSU effi­ciency. Art­icle one focused on a [int­link id=“76” type=“post”]nouveau serveur théorique[/intlink], art-icle 2 sur un [int­link id=“77” type=“post”]PC de bureau typique[/intlink].  This art­icle will focus on a cur­rent real serv­er, and intro­duces a new PSU — an 80+ plat­in­um model.
Lire l'article complet

17Via Mini-ITX 2 LogoDouble Tuner Mini-ITX Créer?

Après dis-CUS-sions sur un [int­link id=“919” type=“post”]article récent[/intlink] Je me demandais si il est possible de construire une set-top box de taille HTPC avec des cartes à double tuner à l'intérieur. Pour atteindre set-top box taille signifie aller Mini-ITX, mais avec la sortie d'un gamme de cartes Mini ITX AMD Fusion c'est la partie facile. Mini-ITX comprend normalement 1 fente expansion, de manière à inclure 2 les tuners nécessitent une solution créative.
Lire l'article complet

0Wordpress LogoFixé: Commentaires zone de disparaître dans le thème Mystique

I recently had a prob­lem where the entire com­ments area was miss­ing from all the posts on this blog. When I switched back to the default twentyten theme they reappeared and at first I thought it was a prob­lem with the mys­tique theme. I switched back to mys­tique and dis­abled all of my plu­gins and the com­ments came backA simple pro­cess of elim­in­a­tion iden­ti­fied the cul­prit — The WP CET Pager Plu­gin. This plu­gin isn’t really neces­sary with the mys­tique theme, so I have simply removed it. If you encounter the same prob­lem with mys­tique, check you haven’t got this plu­gin enabled.