0Windowsの 8 ロゴWindows共有ウェイクが固定した後、接続されていません

I’ve had a very long standing problem where mapped drives on Windows パソコン are shown as disconnected after a PC wakes from sleep or after a reboot. Clicking to open the drive results in a delay of several seconds and then the share opens. I had this problem with Windows 7 right through to Windows 10 1909. 今日, thanks to a different issue, 私は最終的にそれを割れました.

The problem is caused by Microsoft’s out-dated NetBIOS name resolution system. 私 (like most people) map drives to the name of the target server, とと “shortnames” (i.e. names without a domain after them) it seems like Windows tries to resolve the name with something other than DNS.

I discovered that disabling NetBIOS manually (see how below) meant that network drives were connected correctly after a reboot. I realised that if I could disable NetBIOS via DHCP i could fix all the パソコン on my network with very little trouble. I tested this (instructions below) and was again successful!

Manually disabling

  • right click on the networking icon in the system tray
  • Open Network & Internet Settings
  • Change Adapter Options
  • Right click on the relevant connection and select properties
  • Double click onInternet Protocol version 4 (TCP/IPv4)”
  • をクリックします “高度な…”
  • をクリックします “WINS” タブ
  • チェックを外す “Enable LMHOSTS Look-up
  • Select the radio box forDisable NetBIOS over TCP/IP
  • 再起動

Disabling via DHCP

  • This will depend on your DHCP systemmine is a pfsense router
  • In the DHCP Options set option 43
  • On my pfsense box this is set to a string with a value of 01:04:00:00:00:02
  • On a sonicwall box I found the type was set tobytevalueand I had to use a slightly different format which was 0x01;0x04;0x00;0x00;0x00;0x02
  • In both instances we are effectively setting the same value which I believe is a hex. Notice that both have 6 “ビット” with the values 1,4,0,0,0,2. For different systems I found a quick google will provide the appropriate format
  • Delete the previous IP lease on the DHCP system, and then do anipconfig /release” “ipconfig /renew” (2 separate commands) on the client

これが有用であることが判明? 以下のコメントをドロップすることによって、私たちに知らせてください. あなたが購読したい場合は、右上のメニューで購読リンクをご利用ください. また、下記の社会的なリンクを使用してお友達とこれを共有することができます. 乾杯.

返信を残す