我已经在那里在Windows上映射的驱动器很长的老大难问题 电脑 被示出为断开一个PC从睡眠或重新引导后醒来后. 点击开在几秒钟的延迟驱动的结果，然后在打开的份额. 我有这个问题与Windows 7 一直到视窗 10 1909. 今天, 由于不同的问题, 我终于解决了.
The problem is caused by Microsoft’s out-dated NetBIOS name resolution system. 一世 (like most people) map drives to the name of the target server, and with “shortnames” (即. names without a domain after them) it seems like Windows tries to resolve the name with something other than DNS.
I discovered that disabling NetBIOS manually (see how below) meant that network drives were connected correctly after a reboot. I realised that if I could disable NetBIOS via DHCP i could fix all the 电脑 on my network with very little trouble. I tested this (instructions below) and was again successful!
- right click on the networking icon in the system tray
- “Open Network & Internet Settings”
- “Change Adapter Options”
- Right click on the relevant connection and select properties
- Double click on “Internet Protocol version 4 (TCP/IPv4)”
- Click on “Advanced…”
- Click on the “WINS” tab
- Untick “Enable LMHOSTS Look-up”
- Select the radio box for “Disable NetBIOS over TCP/知识产权”
Disabling via DHCP
- This will depend on your DHCP system — mine is a pfsense router
- In the DHCP Options set option 43
- On my pfsense box this is set to a string with a value of 01:04:00:00:00:02
- On a sonicwall box I found the type was set to “bytevalue” and I had to use a slightly different format which was 0x01;0x04;0x00;0x00;0x00;0x02
- In both instances we are effectively setting the same value which I believe is a hex. Notice that both have 6 “bits” with the values 1,4,0,0,0,2. For different systems I found a quick google will provide the appropriate format
- Delete the previous 知识产权 lease on the DHCP system, and then do an “ipconfig /release” “ipconfig /renew” (2 separate commands) on the client
有你自己的一些想法? 下面放纵自己通过评论! 如果您想订阅，请使用菜单上的订阅链接右上方. 您还可以通过使用下面的链接社会分享这与你的朋友. 干杯.