DIY मीडिया होम लोगो

अपनी खुद की होम थिएटर और हाय-Fi सेटअप डिजाइन और बनाने के लिए परम साइट.

0Asus E35M1-मैं डिलक्स वाई-फाई एएमडी फ्यूजन मिनी- ITX मदरबोर्डAsus E35M1 एम प्रो के साथ स्थिरता के मुद्दों फिक्सिंग

मेरे मुख्य का आधार HTPC एक Asus E35M1 एम प्रो के रूप में एक AMD E350 Brazos है. जब मैं पहली बार इसे बनाया है जब मैं प्रणाली के साथ समस्याओं का एक बहुत था, which were caused by issues with the Seagate Momentus XT storage drive I used. These were fixed a good while ago via firmware update from Seagate, and since then the system has largely worked without any issue.

के बारे में 6 months ago the system started to exhibit problems again, occasionally crashing and failing to find the boot device, other times becoming sluggish even with under no सीपीयू प्रयोग. These instances were rare enough that I ignored them as I plan to upgrade the system in the next year or so anyway. अंत में 6 weeks or so however the problems got much worse with daily crashing. This was problematic enough to prevent reliable recording of programmes and so I had to do something. My initial thought was that there was probably still some kind of freak incompatibility between the system and the momentus XT drive, but whilst waiting for a new एसएसडी drive I decided to give the all-in-one motherboard some TLC. To my surprise I hadn’treplaced the stock thermal compound material under the heatsink for सीपीयू/GPU/Chipset. I removed the heatsink and cleaned off all the old compound with some ArctiClean (if you don’t have any I highly recommend it!). I then used some Diamond-7 compound and replaced the heatsink. अंत में, I ripped theasuslogo off the top of the heatsink, as this appeared to me to simply restrict all natural upward airflow fro the middle of the heatsinkreducing it’s efficiency significantly. I then restored the board to the system and reconnected everything. To my pleasure it booted up correctly, the only mistake I’d made was to plug the front and rear speakers in the wrong way round.

Since then I’ve not had a single crash or funny behaviourhere’s hoping the problem was a heat issue caused by badly applied cheap thermalgunk”. If you’re having स्थिरता के मुद्दे with any PC system it’s always worth reconnecting all the connections to the motherboard, and replacing any thermal compound that shipped with the system.

हम कुछ याद है सोचो? हम नीचे टिप्पणी से पता लगाते हैं. आप सदस्यता के लिए चाहते हैं, तो ऊपर दाईं ओर मेनू पर लिंक का उपयोग करें सदस्यता लें. आप नीचे दिए गए सामाजिक लिंक का उपयोग करके अपने दोस्तों के साथ इस साझा कर सकते हैं. चियर्स.

उत्तर छोड़ दें