2Windows Media Center eHome LogoCompleta l'installazione codec 7MC

Ho già postato più volte sui problemi di codec su 7mc, ma ora ho una soluzione completa, abbastanza semplice e funziona in modo coerente. Con un paio di codec liberi e utilità è possibile avere il pieno supporto di decodifica, DXVA, sottotitoli e la flessibilità fantastica che lavorano in 64 bit (o 32bit) Media Center. Le istruzioni che seguono sono specifiche per l'edizione x64, ma dovrebbe funzionare altrettanto bene l'edizione a 32 bit.

1. Down­load and install ffd­show

2. Con­fig­ure ffd­show set­tings

  • Tweak any ffd­show set­tings you want — remem­ber to do it for both x32 and x64 ver­sions — e.g. I use the “mix­er” to out­put ste­reo music to my sub­woof­er as well as the main speak­ers. I also enable lots of addi­tion­al codecs in the video con­fig­ur­a­tion
  • Aperto DXVA Video decoder con­fig­ur­a­tion
  • Click on hard­ware accel­er­a­tion in the menu on the left
  • Tick ​​H264 e VC1
  • Set “post pro­cessing” to “Sur­face over­lay”
  • Click on sub­titles in the menu on the left
  • Barrare la casella in alto
  • Ripetere l'operazione per la x64 DXVA Video decoder con­fig­ur­a­tion

3. Now dis­able the in-built Microsoft Medi­aFound­a­tion codecs (appunto: questo does­n’t rompere dal vivo TV) and replace them with ffd­show

  • down­load the win7dsfiltertweaker
  • Run the fil­ter tweak­er
  • nella prima pagina, select ffd­show (DXVA) where pos­sible, and plain ffd­show for all oth­ers where pos­sible, sia per 32bit e 64bit.
  • Click apply and ok any warn­ings
  • on the next page tick all the boxes to dis­able MF and click apply
  • sul 3rd page tick the bot­tom 2 scatole (dis­able MF and dis­able MF 64bit) e fare clic su Applica.
  • OK l'uscita
  • Aprire regedit e selezionare [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionMedia Cen­ter­De­coder]
  • Eliminare le voci che sono presenti

4. Now install the required split­ters

  • Down-load Haali Media split­ter
  • Down­load the MPC-HC stan­dalone codecs in entrambi i x64 e x32
  • Installare e attivare Haali MPEG-TS
  • estrarre il MPC-HC codec
  • On x64 sys­tems copy the x64 split­ter files to system32 and the x32 files to the syswow64 folder. on x32 sys­tems just copy the x32 files to system32.
  • The split­ter files to copy are as fol­lows: AviSplitter.ax, FLVS­plit­ter, MatroskaS­plit­ter, MP4Splitter, Mpeg­S­plit­ter.
  • There are oth­er split­ter files which you can also copy and register (vedi sotto) ma io non li ho bisogno
  • Register the split­ter files as fol­lows: open an elev­ated com­mand prompt, for each file you copied run the com­mand “regsvr32 file­name”. If you are on x64 win­dows change dir­ect­ory from system32 to syswow64 and repeat the regis­ter­ing

5. Utilizzare modifiche del Registro di sistema per utilizzare il MPC-HC split­ter for most files and Haali for .mkv and .m2t files

  • Aprire regedit e selezionare [HKEY_CLASSES_ROOTMedia TypeEx­ten­sions]
  • Controllare che le loro sono le chiavi per .m2ts, .ts, .mp4, .mkv, .m2t and cre­ate any new keys that are required
  • Inside each key check that their is a string with the name “Source Fil­ter”
  • Set the value of source fil­ter for .m2ts, .ts e .mp4 per {1365BE7A-C86A-473C-9A41-C0A6E82C9FA3}
  • Set the value of source fil­ter for .mkv and .m2t to {55DA30FC-F16B-49FC-BAA5-AE59FC65F82D}

6. Abilita ogg e flac audio

  • Down­load the xiph ogg­co­decs sia per x32 e x64
  • installare entrambi
  • Down-load WMPTag-Plus — oth­er tag extenders don’t seem to work so well
  • Dis­able the x64 Media Play­er by renam­ing the folder “Win­dows Media Play­er” inside the Pro­gram Files folder (on x64 win­dows only!) and then cre­ate a new “Win­dows Media Play­er” folder. copy the con­tents of the “Win­dows Media Play­er” folder from the “Pro­gram Files (x86)” to your new folder. This forces Media Cen­ter to use the Media Play­er 32bit engine for music — which sup­ports the tag extender. Once a 64bit tag extender is avail­able this will no longer be neces­sary

7. Riavviare e si sta bene ad andare.
Any .m2ts files that don’t play back prop­erly rename the exten­sion to .m2t (which as far as win­dows is con­cerned is the same).  This will change the split­ter used and should resolve any play­back prob­lems.

Ha ottenuto alcuni pensieri del proprio? Concedetevi sotto commentando! Se si desidera iscriversi si prega di utilizzare il link iscriviti sul menu in alto a destra. È inoltre possibile condividere con i tuoi amici usando i link sottostanti sociali. Saluti.

lascia un commento

2 Commenti

gravatarIvana

yet anoth­er set­ting that did­n’t work for me, sigh.… avi plays fine, but still no sub­titles (wmp). MP4 ha alcun suono, nessun video (wmp) — obvi­ously, can­’t tell wheth­er sub­titles are work­ing or not. mkv starts play­ing video and audio fine (solo mpc-hc, WMP non giocherà affatto), shows double sub­titles, then with­in seconds video slows down and finally freezes. :/

rispondere
gravatarJon Scaife

Questo è ormai quasi 2 Anni! Le cose si sono spostati su dal. Get the latest ver­sions of ffd­show try­outs, lav split­ter and the Wn7DSFilterTweaker (all linked on the down­loads page). Install ffd­show and lav, and then use the fil­ter tweak­er to dis­able Microsoft’s media-found­a­tion stuff and set ffd­show as the defaults.
You’ll need to turn on sub­titles in ffd­show set­tings but that should work spot on with everything. Ho TS, M2TS, MKV, MP4, AVI, MPEG, WMV, file WTV codificati in Al tipi di formati e tutto funziona solo.
Why do you par­tic­u­larly want to use Win­dows Media Play­er? — there are plenty of oth­er media play­er apps. Or do you mean Media Cen­ter?

rispondere