0充分利用HikVision相机

我在家里有一个用于CCTV的4Mpix Hik­Vi­sion迷你圆顶摄像机. 它提供了一个可修复的价格合理的图片, 但是管理界面有点垃圾,并且用任何东西设置它都是很麻烦的, 因此,这里有一些有关使它工作的注释...


第一, some cred­it to Kyle at the use-ip for­ums for post­ing some help­ful inform­a­tion.

固件

It is well worth updat­ing the firm­ware but Hik­Vi­sion don’t make this easy to find. My cam­era is a DS-2CD1341‑I, but googling for it does­n’t help reveal any firm­ware for it. You need to know that it is often ref­ered to by Hik­Vi­sion as part of the 1×41 series or the R6 plat­form. At time of writ­ing (1ST 可能 2020) the latest firm­ware for all R6 cam­er­as includ­ing mine is 5.5.82, which is avail­able from Hik­Vi­sion Europe.

管理员

Des­pite recent firm­ware hik­vi­sion haven’t figured out a way to write a plu­gin for Chrome or Fire­fox, so you are forced to use the very ancient Inter­net Explorer 11 to do things like update the firm­ware on the cam­era!

添加到Milestone XProtect

You need to enable the cam­er­a’s ONVIF fea­ture, which is found in Net­work -> Advanced Set­tings -> Integ­ra­tion Pro­tocol
Set a user­name and pass­word to access the cam­era with ONVIF
启用ONVIF后, in mile­stone add the cam­era manu­ally by expand­ing “Record­ing Serv­ers”, then right click on your serv­er name and select “add hard­ware”. Select the manu­al option, use the add but­ton and add the ONVIF user­name and pass­word you set on the cam­era, 然后点击下一步. Select “clear all” and then scroll down to ONVIF and expand it and select “ONVIF Con­form­ant Device” and click next. 在下一页上,仅输入 知识产权 address of the cam­era, 然后点击下一步. From here it should be suc­cess­fully detec­ted and you can click next and yes through the rest of the menus

直接访问流

我发现至少有 2 paths that work to access the stream from my cam­era dir­ectly. These will work in some­thing like VLC play­er, but can­’t be web-streamed as they are RTSP which no browsers nat­ively sup­port.

  • RTSP://用户名:密码@IP地址:554/流/频道/ 101
  • RTSP://用户名:密码@IP地址:554/H264 / CH1 /主/ av_stream

发现这个有用? 请不要让我们知道通过下降到低于评论. 如果您想订阅,请使用菜单上的订阅链接右上方. 您还可以通过使用下面的链接社会分享这与你的朋友. 干杯.

发表评论