I use a ConBee II यूएसबी stick for my zigbee mesh in Home Assistant. I wanted to update the firmware and found it is easiest to do this by shutting down HA, unplugging the stick and using a windows machine to update it, then putting it back into the HA system and booting HA back up. There are full instructions for the process in Windows on ड्रेसडेन एलेक्ट्रोनिक की वेबसाइट
0
0
गृह सहायक में वायु गुणवत्ता
I recently wrote about how to show bin collection information in Home Assistant, and my next project was to pull some air quality information. Fortunately I have a ‘Tado’ account which meant I could pull this information from their एपीआई using the following code
... पढ़ें पूर्ण अनुच्छेद
0
गृह सहायक में बिन संग्रह
I’ve been developing my Home Assistant based smarthome setup for around a year now (since leaving SmartThings) and after an initial steep learning curve I’ve been veyr happy with home assistant so I have started working to expand the things it does as I am conifdent it offers a long term basis for my smarthome. One thing I wanted to add was bin collection data to remind me which bin is due when. As I live in Sheffield I needed to pull this data from the local authorities out-sources provider (वेओलिया). The following details how I did this, building very much on the work of others who have done it already for other regions
... पढ़ें पूर्ण अनुच्छेद
0
OpenZWave होम असिस्टेंट के साथ काम करना
I am slowly migrating my smarthome setup to HomeAssistant which, as with most open-source projects, is pretty unfriendly to start with and takes some learning to use. I have an Aeotec ZStick and an Aeotec Doorbell 6 which work via Z‑Wave and I wanted to customise the tones and reduce the volume a little. आपको लगता है कि यह सही होगा?
... पढ़ें पूर्ण अनुच्छेद
0
सही HTPC बिजली की आपूर्ति 2020?
मुझे हाल ही में एक नया मिला है GPU मेरे लिए HTPC which required a replacement power supply as the old one wasn’t suitable for powering a GPU एक साथ 8 पिन PCIe बिजली का केबल. The HTPC is in use for an average of around 6 hours per day and with electricity at 15p/kWh any reduction in power at the wall works out at 33p a year per Watt. This isn’t a big saving, but if consumption is reduced by several watts the saving can add up.
... पढ़ें पूर्ण अनुच्छेद
0
3 WP-CRON को मैन्युअल रूप से चलाने के तरीके
I’ve recently been looking at how best to run wp-cron manually from the system to avoid a performance hit when a visitor loads the site. मैंने अब तक पाया है 3 different ways to run this. और भी हो सकते हैं.
... पढ़ें पूर्ण अनुच्छेद
0
सस्ते स्मार्टप्लग को अद्यतन करना
मेरे पास है previously written about modifying cheap £10 smartplugs to run open source firmware. Now I have quite a number of them I needed an efficient way to update them. In this article I document how to do
... पढ़ें पूर्ण अनुच्छेद
0
माइलस्टोन एक्सप्रोटेक्ट में पुराना फोस्कम FI8918W
I’ve recently been on a tool buying spree and decided I now need a degree of security for my garage. मेरा भी एक पुराना है वीजीए foscam camera sat unused in a box and a functioning CCTV server system, so I figured I might as well set the foscam up inside the garage — not only would it help identify anyone who was in there who shouldn’t be, it will also help me know where I left that tool I just can’t find, and if the neighbours cat has got locked in there again
... पढ़ें पूर्ण अनुच्छेद
0
क्लासिक खेल खुले स्रोत के रूप में क्लोन किए गए
I’ve long been a big fan of Transport Tycoon and have been playing OpenTTD for many years. I recently thought I’d look to see if any other classic games have been similarly cloned, और यह काफी कुछ पता चला है!
... पढ़ें पूर्ण अनुच्छेद
1
एक वेबपेज में एक लाइव RTSP स्ट्रीम एम्बेड करें
I have recently been working on my smarthome setup and one of the things I’ve been meaning to get set up is a tablet with a touch-screen web interface to manage my smart home. One of the first problems I had to crack was how to stream my cctv feed to a web browser…
... पढ़ें पूर्ण अनुच्छेद
हाल की टिप्पणियाँ